674266

Denver WCT-8010 Manual

9
Zoom out
Zoom in
Previous page
1/14
Next page
Video Size, Multi, Video Length, Delay, and Timer.
4.1.6 Set Camera Mode
There are three camera modes: Camera, Video and Camera + Video. The way to set the
camera mode is via setting menu.
The following shows how to set camera mode to Video, provided that the previous
option is Photo:
a) Press MENU to display the setting menu.
b) Press DOWN to select Mode.
c)
Press OK to select Video.
d) Press down the select switch to save the current setting.
Press MENU to cancel setting and return to info display.
4.1.7 Format SD-Card
The system will delete all images or videos stored in the SD-card after formatting, make
sure that you have made a backup of important data.
a) Press MENU to display the setting menu.
b) Press RIGHT to select System setting.
c) Press DOWN to select Format.
d) Press RIGHT to select SD Card.
e) Press down the select switch to choose Enter to enter into submenu.
f) Press down to select OK. OK will be highlighted.
g) Press OK to start formatting the SD-card. During formatting, the display screen
will show a message “Please Wait” as below.
Press MENU to cancel setting and return to info display.
Please Wait!
4.1.8 Set Photo Size
This parameter has three values: 12MP, 8MP and 5MP. The default value is 5 mega
pixels. The following shows how to set pixel size as 5M Pixel:
a) Press MENU to display the setting menu.
b) Press DOWN to select Resolution.
c)
Press OK to select 12M Pixel.
d) Press down the select switch to save the current setting, then press menu to
return to info display.
Press MENU to cancel setting and return to info display.
4.1.9 Set Video Size
This parameter also has four values: 1080P, WVGA.
The default value is 1080P,the following shows how to set 720P video size as provided
that the previous option is at WVGA:
a) Press MENU to display the setting menu.
b) Press DOWN to select Resolution.
c)
Press OK to select WVGA.
d) Press down the select switch to save the current setting, then press menu to
return to info display.
Press MENU to cancel setting and return to info display.
4.1.10
Set Date and Time
You can change the date and time of the device by setting this parameter when
necessary, e.g., after every battery change. The date format is day/month/year, the time
format is hour: minute: second. The valid value for year is between 2010 and 2050.
Provided that the date and time are needed to be set to November 15th, 2011 and half
past ten, the steps are as following:
ENG-9
… 9 …


Need help? Post your question in this forum.

Forumrules
1

Forum

denver-wct-8010

Reset search

  • I have put a 128 GB card in the slot and I get the information ´ard error´. What can I do ? It did not read anywhere in the manual about specification of a card... Submitted on 29-3-2020 at 12:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver WCT-8010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver WCT-8010 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver WCT-8010

Denver WCT-8010 User Manual - German - 14 pages

Denver WCT-8010 Quick start guide - Dutch - 2 pages

Denver WCT-8010 Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info