674266
6
Zoom out
Zoom in
Previous page
1/14
Next page
or any other heat source. These may cause false triggers.
2. The height from ground for placing the camera should 1 meter with the object.
For example for deer waste height is good size appropriately. In general, one to
two meters are preferred.
Slide the power switch to the ON position to power on the camera and enter into the ON
mode.
After switching on the camera, the motion indication LED (red) will blink for about 15s.
The 15s is a buffering time before automatic capturing photos or videos, e.g. for closing
and locking the bottom cover, fixing the camera on a tree and walk away.
In ON mode, the camera will take pictures or videos automatically according to the
default settings or previous custom settings. The camera has the sound recording
function, so the sound will be embedded in the video clip while capturing a video.
3.3 Enter into the TEST Mode
Slide the power switch to the TEST position to enter into the TEST mode. There are some
functions in TEST mode: Custom settings, manual capture, preview.
3.3.1 Custom Settings
Press the MENU button to enter into menu setting. The camera can be taken over
control to manually customize the camera settings which display on the camera or
external TV monitor. The detailed operations will be described in “Advanced Operations”
chapter.
3.3.2 Manual Capturing
You can press shot to manually capture photos or recording video.
3.3.3 View Images or Videos
There are two ways to view the captured images or videos:
1. LCD screen on camera.
2. TV monitors which connects to camera with TV cable.
Press OK to view images, the latest image will be shown in the LCD screen on camera or
TV monitor. Press UP to view the previous image and press DOWN for the next. The
detailed operations like deleting images or videos will be described in “Advanced
Operations” chapter.
3.4 Power Off
Slide the power switch to OFF position to power off the camera. Please note that even in
the OFF mode, the camera still consumes certain power at µA level.
Therefore, please remove the battery if the camera will not be used for a long time.
ENG-6
6


Need help? Post your question in this forum.

Forumrules
1

Forum

denver-wct-8010

Reset search

  • I have put a 128 GB card in the slot and I get the information ´ard error´. What can I do ? It did not read anywhere in the manual about specification of a card... Submitted on 29-3-2020 at 12:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver WCT-8010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver WCT-8010 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver WCT-8010

Denver WCT-8010 User Manual - German - 14 pages

Denver WCT-8010 Quick start guide - Dutch - 2 pages

Denver WCT-8010 Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info