695741
26
Zoom out
Zoom in
Previous page
1/73
Next page
EN-1
LOCATION OF CONTROLS
1) Dust cover 17) CD tray
2) LCD display 18) 3.5mm stereo headphone jack
3) Volume up/down button 19) Remote sensor
4) Sleep button 20) EQ button
5) Standby LED indicator 21) Play/Pause button
6) High speed dubbing button 22) Timer button
7) On/standby button 23) Mute button
8) Stop /St-Mo button 24) CD tray open/close button
9) Random button 25) Skip/Tuning up button
10) Functions button 26) Preset up button
11) Repeat button 27) Cassette door (2)
12) Skip/Tuning down button 28) Deck (2) control keys
13) Preset down button 29) Spindle adaptor
14) Memory/Clk-adj button 30) Turntable speed selector
15) Cassette door (1) 31) Pick-up holder
16) Deck (1) control keys 32) Speaker wire terminal
Record key 33) Auto stop switch
Playback key 34) FM wire antenna
Rewind key 35) AC line cord
Fast forward key
Stop/eject key
Pause key
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the cd mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this unit off
while operating other radio devices.
Due to the complexity of the system, please un-plug the main power supply of the unit if found the unit hang up during
operation!
This is not a malfunction of the system!
Precautions for use
Installation
Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1. Connect the AC line cord (35) to AC outlet and connect the speaker wire to the speaker terminal (32) located on the rear side of
unit.
2. Turn on the unit by On/Standby button (7) and switch the function button (10) to “ Tuner ” function. If the LCD display (2) light up
with blue backlight, it’s mean the power supply is normal. Now your system is ready to play the music.
Setting the clock
1. Set unit in standby mode.
2. Press & hold the “ Mem/Clk-adj ” button (14), the LCD display (2) will show “ 12H ” and flashing. Press skip up or skip down
button (25,12) to select the appropriate area hour format(12hr/24hr). Press “Mem/Clk-adj” button (14) again to confirm.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver MRP-161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver MRP-161 in the language / languages: All languages as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver MRP-161

Denver MRP-161 User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info