4. Set the turntable speed selector to appropriate speed 33, 45 or 78rpm. If you are playing
45 rpm singles, place the 45rpm adapter on the centre spindle.
5. Place your record on the the centre spindle.
6. Raise the cue lever to lift the tone arm of its rest. Move the tone arm to the edge of the
record. The turntable starts automatically. Use the cue lever to gently lower the tone arm
onto the record.
7. Adjust the volume control to the desired level.
8. When the tone arm reaches the end of the record it automatically returns to the tone arm
rest and the record player stops.
9. Press POWER again to turn the system off. The POWER indicator goes OFF.
Note: Do not turn or stop the turntable manually. Moving or jarring the turntable without securing
the tone arm clamp could result in damage to the tone arm.
AUX IN OPERATION
Conenct the audio system into the AUX IN jack on the rear panel, Press the PHONO/AUX IN
button. Start playing from the connected device.
USB OPERATION
1. Press the CD/USB button first and the FUNCTION button to enter USB mode. The ‘---‘ and
USB icon will be shown.
2. Insert a USB flash device into the USB socket.
3. PLAY/PAUSE, DN/UP and stop functions are the same as CD functions.
Note: You may press the FUNCTION on the panel or long press PLAY/PAUSE button on the remote
control for 2 seconds to change the playing mode between CD and USB.
PLAYING IN MP3 MODE (CD/USB)
1. Press PLAY/PAUSE button to start or pause playback selected track.
2. While playing the song, the song number and folder number of the slected track will be
shown in the display.
3. You can stop the playback at any time by pressing the STOP button.
