820560
71
Zoom out
Zoom in
Previous page
1/109
Next page
68/106
wind force, type of road, constant
braking).
3) Frequent coasting or headwinds as
well as poor roads
4) the tire pressure is not high enough
(inflate them)
5) frequent stops and restarts
6) The battery has been stored without
recharging for a long time.
3) this is a normal cause and the
problem will be solved with improved
conditions
4) inflate the tires to a pressure of 3.1
bar
5) the problem will be solved with the
improvement of the usage conditions
6) regularly recharge the battery in
accordance with the instruction
manual. If this does not solve the
problem, contact your dealer or a
qualified professional.
After connecting the charger, the
charging LEDs do not light up.
1) problem with the electrical outlet
2) faulty contact between the charger
input socket and the electrical outlet
3) the temperature is too low
1) check and repair the electrical outlet
2) check and fully insert the socket
3) charge indoors
If the previous solutions don’t work
contact your dealer or a qualified
professional.
After recharging for more than 4/5
hours, the charge indication LED is still
red
(note: it is very important to recharge
the battery according to the
instructions to avoid damaging the
equipment).
1) the ambient temperature is 40°C or
higher
2) the ambient temperature is 0 ° C or
less
3) The bicycle was not recharged after
use which exacerbated the decrease in
charge
4) The output voltage is too low to
recharge the battery.
1) recharge the battery at a
temperature below 40°C and in
accordance with the instructions
2) recharge the battery indoors and in
accordance with the instructions
3) correctly maintain the battery to
avoid an exacerbating the decrease in
charge
4) Do not recharge with a voltage lower
than 100 V.
If the previous solutions don’t work
contact your dealer or a qualified
professional.
LCD display:
The speed is not displayed on the LCD
monitor.
The magnetic ball on the wheel radius is
too far from the sensor (attached to the
rear of the frame or the front fork)
which prevents the sensor from
Check the distance between the
magnetic ball and the sensor and make
sure it does not exceed 5 mm.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver Carratt E-4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver Carratt E-4400 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info