2 AM loop antenna assembly
2 DAB indoor antenna assembly
Connect to the AM
antenna terminals.
Remove the vinyl tie
and take out the
connection line.
Bend in the reverse
direction.
a. With the antenna
on top any stable
surface.
b. With the antenna
attached to a wall.
Mount
Installation hole Mount on wall, etc.
Connection of AM antennas
q Push the lever. w Insert the conductor. e Return the lever.
NOTE:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch
metal parts of the panel.
• There is a magnetic on the bottom surface of the DAB
indoor antenna. Keep it away from monitors, etc.
Mount the antenna’s screw to the stand.
2 Connecting an DAB outdoor antenna
• If good reception cannot be achieved with the included DAB indoor antenna, use an DAB outdoor antenna. Connect an F male
type connector to the coaxial cable and connect the antenna to the DAB COAX 75 Ω/ohms terminal.
2 Installing the DAB indoor antenna
q DAB station reception ( page 18).
w Use “Tuning aid” to set position at which reception sensitivity is optimum ( page 21).
DAB indoor antenna
(Supplied)
Connecting the antenna terminals
Use tape or a pin to fasten
the tip of the antenna to the
wall, a rack, etc.