161371

Denon tu1800 dab Manual

6
Zoom out
Zoom in
Previous page
1/28
Next page
Getting Started
6
q Power ON/STANDBY operation switch
The unit works 2 ~ 3 seconds after this switch is turned on.
Whenever the Power ON/STANDBY operation switch is
in the STANDBY state, the apparatus is still connected on
AC line voltage.
Please be sure to unplug the cord when you leave home
for, say, a vacation.
w SECONDARY indicator
Indicates when a secondary service is available ( page 19).
e STEREO indicator
This lights when receiving stereo broadcasts. It remains
off when receiving FM monaural and AM broadcasts.
r TUNED indicator
This lights when a station is properly tuned in.
t RDS indicator
This lights when receiving RDS broadcasts, and flashes
during the RDS search.
y ON/STANDBY indicator
This lights when the units status is on and stand by.
u Remote control sensor
This sensor receives the infrared light transmitted from the
wireless remote control unit.
For remote control, point the wireless remote control unit
to the sensor.
Some of the functions can be operated with the remote
control unit (RC-1013).
i Display
o DIMMER button
The display’s brightness switches (in three levels) each
time this button is pressed.
!0 MENU button
This button to enter/exit menu mode.
The unit times out if no operation is performed for about 5
seconds after the menu mode is set.
!1 DISPLAY button
This button is used to select the display mode ( page
13, 16, 23).
!2 BAND button
Selects DAB, FM or MW (AM).
!3 AUTO TUNE button
Press to active auto location of all available DAB services.
Press once for UK service or hold for longer than 2
seconds to activate an inter national search.
!4 TUNING/PRESET knob
Each pass of this knob toggles the operation mode of the
TUNING / PRESET knob.
This knob is used in conjunction with the TUNING/PRESET
knob.
In the tuning mode the reception frequency is tuned up or
down. Turning the control in the clockwise direction tunes
the frequency up. Tuning the control in the counterclockwise
direction tunes the reception frequency down.
In the preset mode the selection of the preset channel is
moved up or down. The auto tuning operation cannot be
used when in this mode.
When writing station names, use this control to select the
letters ( page 17)
• Whenever the Power ON/STANDBY operation switch is in
the STANDBY position, the unit is still connected on AC line
voltage.
Please be sure to unplug the cord when you leave home for,
say, a vacation.
• Noise may be generated if a near-by television set is on
during MW (AM), FM, DAB broadcasting reception. The tuner
should be used as far away from a television as possible.
• Effective period of memory back-up is about a month under
normal temperature.
MEMO
Part names and functions
• For details on the functions of these parts, refer to the pages given in parenthesis ( page 10 ~ 24).
q
w
e
r
t
i
o
!0
!11
!2
!3
u
y
!4
Front panel
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon tu1800 dab at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon tu1800 dab in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info