498669
61
Zoom out
Zoom in
Previous page
1/98
Next page

ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Playback
(Basic)
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Setting items Setting details
Channel Level
Set the volume of the test
tone to be the same when it
is output from each speaker.
Test Tone : Output test tone.
Front L / Front Height L / Center / Front Height R / Front R / Surround R /
Surround Back Rz / Surround Back Lz / Surround L / Subwoofer :
Select the speaker.
When the “Speaker Configuration” “Surround Back” setting
(vpage 56) is set to “1spkr”, “Surround Back” is displayed.
–12dB – +12dB (0dB) : Adjust the volume.
When o is pressed while the subwoofer volume is set to “–12 dB”,
the “Subwoofer” setting switches to “OFF”.
NOTE
Speakers set to “None” in the “Speaker Configuration” (vpage 55,
56) settings are not displayed.
When using surround speakers, be sure to adjust the volume of the
different speakers.
When a headphones jack is inserted in the PHONES terminal of this unit,
the “Channel Level” is not displayed.
z
Default : Reset all channel level settings to factory default.
Yes
No
Crossover Frequency
Set the maximum frequency
of the bass signal output
from each channel to
the subwoofer. Set the
Crossover Frequency to
suit the bass reproduction
capability of the speaker
being used.
40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
250Hz : Set the crossover frequency.
Advanced : Specify crossover frequency for each speaker.
Front / Center / Surround / Surround Back / Front Height : Select the
speaker.
40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
250Hz : Set the crossover frequency.
Crossover frequency can be set when the “Speaker Configuration”
“Subwoofer” (vpage 55) setting is “Yes”, or when you have a
speaker that is set to “Small”.
Always set the crossover frequency to “80Hz”. When using small
speakers, however, we recommend setting the crossover frequency to
a higher frequency.
The speakers that can be set when “Advanced” is selected differ
according to the “Subwoofer Mode” setting (vpage 56).
When “LFE” is selected, speakers set to “Small” at “Speaker
Configuration” can be set. If the speakers are set to “Large”, “Full
Band” is displayed and the setting cannot be made.
If set to “LFE+Main”, this setting can be made regardless of the
speaker size.
Manual Setup
HDMI Setup
Default settings are underlined.
Make settings for HDMI video/audio output.
Setting items Setting details
HDMI Audio Out
Select HDMI audio output
device.
This can be set when the
input source on the unit
is “BD/SD”, “HDMI1”,
“HDMI2” or “HDMI3”.
Amp : Plays back using the speakers.
TV : Plays back on the TV.
When the HDMI control function is activated, priority is given to the TV
audio setting (vpage 41 “HDMI Control Function”).
HDMI Control
You can link operations with
devices connected to HDMI
and compatible with HDMI
Control.
Please consult the
operating instructions for
each connected component
to check the settings.
Refer to “HDMI Control
Function” (vpage 41) for
more information about the
HDMI control function.
NOTE
The HDMI control function
controls operations of a
TV that is compatible with
the HDMI control function.
Make sure that the TV and
HDMI are connected when
you perform HDMI control.
If the “Control” settings
have been changed,
always reset the power to
connected devices after
the change.
Control
ON : Use HDMI control function.
OFF : Do not use HDMI control function.
When a device that is not compatible with the HDMI control function
is connected, set “Control” to “OFF”.
NOTE
When “Control” is set to “ON”, it consumes more standby power.
If you are not using this unit for an extended period, it is recommended
that you unplug the power cord from the power outlet.
“HDMI Control” does not work when the power to the equipment is off.
Either turn power on or set to standby.
Standby Source : Sets the HDMI input source to put into standby when
the power is on.
Last : This item is set at the last-used input source.
HDMI1 / HDMI2 / HDMI3 : Put the respective input source into
standby.
“Standby Source” can be set when “Control” is set to “ON”.
Power Off Control : Links the power standby of this unit to external
equipment.
ON
OFF
“Power Off Control” can be set when “Control” is set to “ON”.
Remote control operation
buttons
Display the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon S-5BD - Cara at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon S-5BD - Cara in the language / languages: English as an attachment in your email.

The manual is 17,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon S-5BD - Cara

Denon S-5BD - Cara User Manual - German - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info