498669
60
Zoom out
Zoom in
Previous page
1/98
Next page

ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Playback
(Basic)
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Setting items Setting details
Speaker Configuration
(Continued)
Surround Back : Set the presence, size and number of surround back
speakers.
Large : Use a large speaker that can adequately play back low
frequencies.
Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the surround back speakers are not connected.
2spkrs : Use two surround back speakers.
1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
Even when the “Surround Back“ setting is other than “None”, sound
may not be emitted from the surround back speaker, depending
on the playback source. In this case, make “Surround Parameters”
– “Surround Back” setting other than “OFF” (vpage 52).
NOTE
When the “Speaker Assign” setting (vpage 55) is other than “5.1CH +
Surround Back”, you cannot make the “Surround Back” setting.
Front Height : Set the presence and size of the front height speakers.
Large : Use a large speaker that can adequately play back low
frequencies.
Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the front height speakers are not connected.
NOTE
When the “Speaker Assign” setting (vpage 55) is other than “5.1CH +
Front Height”, you cannot make the “Front Height” setting.
Bass Setting
Set subwoofer and LFE
signal range playback.
Subwoofer Mode : Select low range signals to be reproduced by
subwoofer.
LFE : The low range signal of the channel set to “Small” speaker size is
added to the LFE signal output from the subwoofer.
LFE+Main : The low range signal of all channels is added to the LFE
signal output from the subwoofer.
This item can be set when “Speaker Configuration” “Subwoofer”
(vpage 55) is set to “Yes”.
Play music or a movie source and select the mode offering the strongest
bass.
Select “LFE+Main” if you want the bass signals to always be produced
from the subwoofer.
Manual Setup
Setting items Setting details
Bass Setting
(Continued)
LPF for LFE : Set LFE signal playback range.
80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
“LPF for LFE” can be set when “Speaker Configuration” “Subwoofer”
(vpage 55) is set to “Yes”.
Distance
Set distance from listening
position to speakers.
Measure beforehand the
distance from the listening
position to each speaker.
Meters / Feet : Set the unit of distance.
Step : Set the minimum variable width of the distance.
0.1m / 0.01m
1ft / 0.1ft
Default : Reset all distance settings to factory default.
Yes
No
When you select “Default” and press ENTER, the “Return all settings
to the default?” prompt is displayed. Select either “Yes” or “No”, and
press ENTER.
Front L / Front R / Center / Subwoofer / Surround L / Surround R /
Surround Back Lz / Surround Back Rz / Front Height L / Front Height
R : Select the speaker.
When the “Speaker Configuration” “Surround Back” setting
(vpage 56) is set to “1spkr”, “Surround Back” is displayed.
0.00m18.00m / 0.0ft60.0ft : Set the distance.
The speakers that can be selected differ depending on the “Speaker
Assign” (vpage 55) and “Speaker Configuration” (vpage 55, 56)
settings.
Default settings :
Front/Center/Subwoofer/Front Height : 3.60 m (12.0 ft)
Surround/Surround Back : 3.00 m (10.0 ft)
Set the difference in the distance between the speakers to less than 6.0
meters (20 feet).
NOTE
Speakers set to “None” in “Speaker Configuration” (vpage 55, 56) are
not displayed.
z
Remote control operation
buttons
Display the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon S-5BD - Cara at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon S-5BD - Cara in the language / languages: English as an attachment in your email.

The manual is 17,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon S-5BD - Cara

Denon S-5BD - Cara User Manual - German - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info