160360
31
Zoom out
Zoom in
Previous page
1/39
Next page

Getting Started Connections Setup Information Troubleshooting
ENGLISH
Playback
When the input source is “Internet Radio”, “PC Music”, “iPod”, or
“CD”, if music does not play when the alarm on time is reached, a
Beep will sound.
Alarms 1 and 2 operate separately.
If the set is not operated for 60 minutes after alarm playback starts,
playback stops and the function off (The Beep sound stops after 5
minutes).
When you want alarm playback of an iPod recording, set iPod while
pausing the track you want to play.
n Pausing alarm playback (snooze function)
Press <MUTE / SNOOZE> during alarm playback.
Alarm playback resumes 5 minutes after it was stopped.
n Stopping alarm playback
Either press <ALARM1> or <ALARM2> on the main unit to turn the
alarm off, or press the main unit’s <FUNCTION ON/OFF>.
If there is a power failure
n When connected to a network
When the power comes back on, the set automatically connects
to an SNTP (Simple Network Time Protocol) server and the current
time is adjusted automatically. Once the zone, daylight saving time
and alarm time have been set, they are stored in the memory, so
there is no need to set them again.
n When unconnected to a network
When the power comes back on, the clock resumes from the time
the power turned off. If the time is way off, turn the power on and
reset the current time. If the alarm time has been set, it is stored in
the memory, so there is no need to set it again.
Alarm Setting
Set the alarm time, source and volume.
1
Press <ALARM SETTING> to set the alarm.
2
GAlarm number selectionH
Turn <Multi Jog> to select “ALARM1” or
“ALARM2”, then press ENTER.
3
GAlarm time settingH
Select time with <Multi Jog>, then press ENTER to
set.
b Turn <Multi Jog> clockwise to increment the set value, and counter-
clockwise to decrement it.
4
GAlarm source settingH
Select alarm source with <Multi Jog>, then press
ENTER to set.
5
GAlarm volume level settingH
Select alarm volume level with <Multi Jog>, and
press ENTER to set.
6
Press <ALARM1> or <ALARM2>, and set the alarm
on.
Advanced Operation
1
Set the current time (vpage 11).
2
During playback, use SLEEP to select the time.
120 90 60 50 40 30 20 10
b After about 5 seconds, the previous display reappears and the
timer starts.
3
The power is set to the function off mode after the set
amount of time.
Off
Setting the Sleep Timer
Use this function to automatically switch the power to
the function off mode after a specific amount of time
(minutes).
Canceling the sleep timer
Press SLEEP, select Off” from the sleep timer time display.
Checking the time remaining until the sleep timer
starts
Press SLEEP.
Checking the current time
Press [DISPLAY] or hold down DIMMER for 2 seconds or more.
The time is displayed.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon s 52 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon s 52 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon s 52

Denon s 52 Quick start guide - English - 4 pages

Denon s 52 User Manual - German - 39 pages

Denon s 52 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info