584591
9
Zoom out
Zoom in
Previous page
1/18
Next page
Settings
NOTE
The MODE, CONTROL, Operation mode select switch and Input select
switch must be set before turning the power on. Settings which are
changed after powering on will not be registered. In such cases, the
power should be switched off and on again.
SPEAKERSSPEAKERSSPEAKERSSPEAKERSSPEAKERS
CONTROL
Input select
switch
Operation mode
select switch
MODE
[Rear panel]
Change the input mode
Change the input mode for each channel (L1 ~ L5, R1 ~ R5).
Set the Input select switch.
XLR
: Use XLR terminal.
RCA
: Use RCA terminal.
OFF
: Channel is not used.
NOTE
When the input and Input select switch setting on the unit are
different, the unit does not operate.
If CONTROL is set to “AVP”, this setting is invalid.
Change the operation mode
Change the operation mode for each channel (L1 ~ L5, R1 ~ R5)
or pair channel (L1 / L2, L3 / L4, L5 / R5, R1 / R2, R3 / R4).
Bi-AMP / NORMAL / BRIDGE mode selection
Set how to use the power amp with each channel.
Set the Operation mode select switch.
Bi-AMP
: Used for Bi-Amp connection.
NORMAL
: Used for NORMAL connection.
BRIDGE
: Used for BRIDGE connection.
OPTION / 1 / 2 mode selection
Use control link to connect POA-A1HDCI and AVP-A1HDCI and switch
POA-A1HDCI according to the number of units to be connected.
Select MODE.
OPTION
: For future use, if the range of functions is expanded.
1
: Used as the rst unit when one POA-A1HDCI unit is
used or two POA-A1HDCI units are connected.
2
: Used as the second unit when two POA-A1HDCI units
are connected.
NOTE
Channels that have the input mode set to “OFF” can not be
selected.
If CONTROL is set to “AVP”, this setting is invalid.
Select CONTROL.
AVP
: Operates the unit from the AVP-A1HDCI (vpage
7).
OFF
: Control mode is not used.
EXTERNAL
: Operates the unit from equipment connected
to the RS-232C connector or TRIGGER IN jack
(vpage 12).
Change the control mode
Select the option suited for the equipment operating the unit.
When
CONTROL
is set to AVP”, the PRE AMP CONTROL LINK indi-
cator lights in blue.
6
Getting Started Connections and Settings Operations Troubleshooting
1.POA-A1HDCIEU.indd 9 2008/01/18 11:07:01
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon POA-A1HDCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon POA-A1HDCI in the language / languages: English as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info