498788
12
Zoom out
Zoom in
Previous page
1/17
Next page
8
ENGLISH
Getting started
Basic connections Basic operation Troubleshooting Specifi cations IndexAdvanced connections Advanced operation Explanation terms
INPUT SELECTOR
VOLUME
[MUTE]
[AMPLIFIER POWER]
<POWER AMP DIRECT>
<SOURCE DIRECT>
VOLUME
<BASS>
<TREBLE>
<BALANCE> INPUT SELECTOR
<REC OUT SELECTOR>
Starting recording
1
Set <REC OUT SELECTOR> to the program source
you wish to record.
2
Set the recorder to the record mode.
3
Start playing the source to be recorded.
NOTE
The recording source switches INPUT SELECTOR is operated during
recording.
Copying recorders
1
Turn the <REC OUT SELECTOR> and select
“RECORDER-1 1 2” (or “RECORDER-2 1 1”).
[Selectable sources]
RECORDER-1 1 2
RECORDER-2 1 1
b When copying from a device connected to the
“RECORDER-1” terminal to a device connected to the
“RECORDER-2” terminal, select “RECORDER-1 1 2”.
b When copying from a device connected to the
“RECORDER-2” terminal to a device connected to the
“RECORDER-1” terminal, select “RECORDER-2 1 1”.
2
Set the device connected to the RECORDER-1 (or
RECORDER-2) terminal to the record mode.
3
Start playback on the device connected to the
RECORDER-2 (or RECORDER-1) terminal.
The sound to be recorded can be heard by selecting the playback
source with the INPUT SELECTOR, while the recorded sound can
be heard by selecting the recorder.
When performing these operations, also refer to the operating
instructions of the other devices.
NOTE
The sound may be interrupted or noise may be recorded if INPUT
SELECTOR
is operated during recording.
Starting playback
1
Use INPUT SELECTOR to select the source.
The input indicator for the selected source lights.
[Selectable sources]
RECORDER-2
RECORDER-1
PHONO
CD
TUNER
LINE
2
Play the selected source.
3
Adjust the VOLUME to the desired level.
4
Adjust the tone with <BASS>, <TREBLE> and
<BALANCE>.
When the VOLUME control knob is turned just past the “12
o’clock” position (over halfway), the effect of BASS and
TREBLE adjustments decreases.
When the VOLUME control knob is turned to maximum or
all the way clockwise, the bases and treble can no longer be
adjusted.
5
If there is no need to adjust the tone, press <SOURCE
DIRECT>
.
When switched “hON”, the signal does not pass through
the tone adjustment circuitry (bass, treble and balance),
resulting in playback of a higher sound quality.
When set to “jOFF”, the sound can be adjusted to suit
your taste.
6
Press [MUTE] to mute the sound.
The power indicator on the main unit blinks red.
Press again for sound.
Using headphone set
Plug headphones into PHONES jack.
The speaker output turns off when the headphones are plugged in.
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
PHONES jack
Basic operation
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
1.PMA1510AEE2_ENG_002_5th_0222.indd 8 2010/02/23 15:55:17
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon PMA-1510AE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon PMA-1510AE in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info