584585
18
Zoom out
Zoom in
Previous page
1/71
Next page
TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications
ENGLISH

1. Home Theater Playback – Playing Back Using Multi-channel System –
Setting HDMI video output
Make HDMI Output Signal and HDMI Control Function Settings
“HDMI Setup” (vpage 25, 26)
Make the Video Output Signal Setting for the Connected Television
“Video Setup” (vpage 26)
About HDMI Video Resolution Setting
Change the HDMI video resolution by pressing . Switch the output mode as follows. Default
settings are underlined.
Auto 480/576i
1080P24 1080P 1080i
480/576P
720P
Source Direct
If the HDMI resolution is not set to Auto”, set it to correspond with the resolution of your television.
Images will not be projected normally if the television resolution and DVD-A1UDCI’s output resolution
do not match.
Audio and video will be temporarily interrupted if the power of the connected device currently playing
back is turned off, or input is switched.
When you change the HDMI video resolution of the DVD-A1UDCI, it takes from a few seconds up to
about 10 seconds for validation between the DVD-A1UDCI and the connected device. Audio/video is
not output during this period.
When outputting deep colour or 1080p, etc., we recommend you use High Speed HDMI cable for
enhanced high-quality playback.
n
n
n
Required Settings for HDMI Connection
(480/576 interlaced) (480/576 progressive)
(720 progressive)(1080 interlaced)(1080 progressive)(1080 progressive, 24-frame)
(Source direct)
(Auto)
Setting HDMI Audio Output
When you press and set “HDMI Setup– “Audio Setupto Auto” (vpage 25) on the GUI menu,
audio mode is set according to the connected device.
When you want to set the HDMI audio output separately, change according to the following table.
Refer to the owner’s manual of the connected device regarding HDMI audio input specications
compatible with the connected device.
Device to be connected Setting items About output signal and speaker settings
Device with the following
built-in decoder
Dolby TrueHD
Dolby Digital Plus
Dolby Digital
DTS-HD
DTS
·
·
·
·
·
Auto
DVD-A1UDCI outputs a bitstream signal that is decoded by
the connected device.
In this case, you cannot make a speaker setting for HDMI
audio with the DVD-A1UDCI.
Make the setting with the connected device.
When outputting the Dolby TrueHD or DTS-HD audio,
press and set “BD Audio Mode” to “HD Audio
Output” (vpage 33).
b
b
Device compatible with
multi-channel HDMI audio
input, but not capable of
speaker setting for each
channel
Multi LPCM
BM On
Outputs multi-channel Linear PCM audio signals with
speaker setting by the DVD-A1UDCI.
For speaker setting, on the GUI menu, Audio Setup
“7.1ch Audio Out”– “Multi Channel” “Speaker
Conguration” (vpage 27).
BM : Bass Management (means multi-channel speaker
setting)
b
b
Device compatible with
multi-channel HDMI audio
input, and capable of
speaker setting for each
channel
Multi LPCM
BM Off
Output of multi-channel Linear PCM audio signals from the
DVD-A1UDCI.
Perform the speaker setting with the connected device.
BM : Bass Management (means multi-channel speaker
setting)
b
Device compatible with 2-
channel HDMI audio input 2ch
Downmixed 2-channel Linear PCM audio signals are output
from the DVD-A1UDCI.
Perform the speaker setting with the connected device.
Device not compatible with
HDMI audio signal input Mute
Audio signal are not output from the DVD-A1UDCI’s HDMI
terminal.
Only video signals are output from the HDMI terminal.
Make the audio connection.b
NOTE
When the HDMI video resolution is set to “1080P24”, HDMI video signals are output from the DVD-
A1UDCI with a resolution of 1080P and a frame rate of 24 frames per second, regardless of the video
signals on the disc being played. Because of this, when playing discs containing video signals recorded
with a frame rate of something other than 24 frames per second, the movement of the picture may be
unnatural. If this happens, set the HDMI video resolution to something other than “1080P24”.
Connections
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DVD-A1UDCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DVD-A1UDCI in the language / languages: English as an attachment in your email.

The manual is 12,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info