584585
16
Zoom out
Zoom in
Previous page
1/71
Next page
TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications
ENGLISH

1. Home Theater Playback – Playing Back Using Multi-channel System –
There are 5 ways to connect (qt) using HDMI cable (sold separately). Congure appropriate
connection for HDMI mode rst and then set HDMI mode using .
When connecting with HDMI cable, perform the settings in “Required Settings for HDMI
Connection” (vpage 15).
DVD-A1UDCI automatically detects audio/video signal supported by the connected HDMI device
and outputs the signal. To change the setting, see “HDMI Setup” on the GUI menu (vpage 25,
26).
HDMI mode Output signal from each terminal
HDMI OUT 1 HDMI OUT 2
q HDMI Auto (Dual)
(HDMI Dual)
Used for multi-channel
playback using 2 devices. Video + Audio Video + Audio
w HDMI Auto (Independent)
(HDMI Inde.)
Used for multi-channel
playback using one device
and 2-channel playback
using the other unit. (z1)
Video + Audio Video + Audio
e AV Pure Direct
(AV P.Direct)
Used for the highest
quality playback using
different HDMI cables to
connect video and audio
separately.
Video Audio
r HDMI1 Used for connecting only
1 device.
Video + Audio Does not output
t HDMI2 Does not output Video + Audio
y HDMI Off Used when HDMI
connection is not used. Does not output Does not output
z1 : If the number of channels supported by 2 devices is the same, multi-channel audio is output
to both devices.
NOTE
To disable video or audio output from the HDMI terminal, set “Video Out” of “Pure Direct Setup”, which
outputs high quality analog audio to “Off”. To enable the HDMI signal output, set the Pure Direct mode
to one of the following setting:
Pure Direct mode “Off” or “User Preset 1” or “User Preset 2” (b)
(“Playing Back High-Quality Audio (Pure Direct Function) ” vpage 40)
Do this after setting “Pure Direct Setup” – “User Preset 1” or “User Preset 2” Video Out” on GUI
menu to “On” (vpage 30).
b
Using an HDMI Cable to Connect to an AV Amp or Television Default settings are underlined.
Video and Audio Output Signal when Outputting to 2 HDMI Devices
(HDMI Auto(Dual) Mode and HDMI Auto (Independent) Mode)
About Video Signal
When About HDMI Video Resolution Setting” (vpage 15) is set to Auto”, of the resolution
supported by both of the 2 connected devices, the DVD-A1UDCI outputs the highest resolution
video signal to both devices.
About Audio Signal
(1) Check audio signals that can be input by the device to be connected.
Audio format·∙·∙·∙·∙·∙·∙·∙·∙·∙·∙·∙·∙·∙·∙Bit stream (Dolby Digital, DTS etc.), Linear PCM, etc.
Number of channels
(2) About number of output channels of multi-channel audio
When outputting bitstream signals to two HDMI devices, the signals are output to both HDMI devices
if they both support bitstream signals. Of only one device support bit stream, LPCM is output to the
device, which does not support bit stream.
When outputting LPCM signals to two HDMI devices, it is not possible to output multi-channel audio
signals with different numbers of channels to the two HDMI devices.
When the number of channels of multi-channel audio supported by the connected 2 HDMI devices
are different, the audio signal output to each mode becomes as follows:
HDMI Auto (Dual) :
Outputs multi-channel audio of less number of channels to both devices.
If the supported number of channels is 7.1 channel and 5.1 channel, respectively, 5.1 channel audio
is output. If the supported number of channels is multi-channel and 2-channel (or 2.1-channel), multi-
channel and 2-channel are output.
HDMI Auto (Independent) :
Multi-channel audio is output as is to the device, which supports more number of channels.
LPCM audio of 2-channel is output to the other device.
We recommend you use this mode when outputting to both an AV Amp and TV.
About Audio Format to be Output
Audio format supported by 2 connected HDMI devices is output.
When multi-channel audio is output, the output channel is as described above (2).
n
n
n
Connections
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DVD-A1UDCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DVD-A1UDCI in the language / languages: English as an attachment in your email.

The manual is 12,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info