614642
8
Zoom out
Zoom in
Previous page
1/36
Next page
8
ENGLISH
i
Play/Pause button (13)
This button will start or pause playback.
Push once to start playback, once again to
pause playback, and once more to resume
playback.
o
DISC EJECT button
Eject disc with this button while button
illumination light. Note that if illumination is off,
you cannot eject disc.(Eject lock function)
!0
CUE button
Pushing this button in play mode will force the
track back to the position which playback
started. While in search mode, it makes new
Cue point. (Cue)
In Cue mode, by pushing the CUE button
makes a Stutter sound from the Cue point. This
is called Stutter play. (Stutter)
!1
Platter/Scratch Disc
Use this vinyl scratch disc for manual search,
Pitch Bend and Scratch operations.
Platter:
The Platter turns when playback of the source
select Scratch mode button is in the Main or
Sampler position and in play mode.
Scratch Disc:
When the Scratch Disc is turning, Scratch
playback of the source selected (Main or
Sampler) starts.
NOTE: The Platter does not turn when the
Scratch mode is set to the SEARCH
mode. If PLATTER TURN STOP is
selected within the presets, the Platter
never turns, regardless of the Scratch
mode.
However, you still may be able to
scratch normally without the platter
spinning.
When using the player in this mode,
there will a small delay upon release of
the scratch disc. (This is normal)
To avoid this delay, press the PLAY
button simultaneously upon release of
the scratch disc with your thumb.
(3) Top panel
CAUTION:
Note that there are many buttons working two
different function selected by short time
pushing or long pushing (1second or more). The
mark indicates short time push function and
mark indicates long time push function.
CAUTIONS:
Do not forcibly try to stop the Platter when
it is turning. Otherwise Platter moving
mechanism may be damaged.
If a problem with Platter rotation arises
when the Platter is turning, the Platter
stops turning and the pause mode is set.
!2
FLIP/CLR button
FLIP:
Use this to select operating mode of A button,
from Hot Start mode and Stutter mode. FLIP
LED lights up in Hot Start mode.
A CLR:
If the A button is pushed while pushing the
FLIP button, you can clear the A point.
Or, by holding down just the FLIP button for
more than 1 sec.
!3
(SAMP) RVS/CLR button
(SAMP)RVS:
Use this to select the sample play direction
forward and reverse. When select reverse
RVS LED lights up.
(SAMP) CLR:
If the SAMP button is pushed while pushing
the FLIP button, you can clear the SAMP data.
Or, by holding down just the FLIP button for
more than 1 sec.
!4
A button
Using this button you can create starting point
for Hot Start, Seamless Loop and Stutter.
!5
SAMP button
Push this button to record or play sound of
Sampler.
!6
B button
Use this to set the B point for A point of
Seamless Loop.
!7
(SAMP) B button
Use this to set the Sampler loop B point.
!8
EXIT/RELOOP button
Use this to exit or return back again to
Seamless loop playback. You can add variety
to looping with this function.
The LED indicates whats going on about
looping.
EXIT/RELOOP LED lit:
Seamless Loop on or playing.
EXIT/RELOOP LED flashing:
Playback after exit loop.
3
PART NAMES AND FUNCTIONS
(1) Front panel
q
Disc loading slot
Load the disc slowly, and release it once the
DN-S3000 starts grabbing the disc in.
w
CD drive
This Drive is field replaceable by you.
Optional spare drive is sold separately.
CAUTIONS:
Do not load discs when the power is turned
off.
Do not try to forcibly remove a disc once
the DN-S3000 has started to grab the disc.
Do not load more than once disc at a time
or insert anything other than discs.
Otherwise loading mechanism may be
damaged.
e
POWER button (¢ON £OFF)
Push this button to turn power on and off.
r
X-EFFECT jacks
(X-EFFECT IN/OUT)
Connect this jack to the DENON mixer DN-
X800 and DN-S3000 with 3.5 mm stereo mini
cord.
t
Analog output jacks
(LINE OUT)
This is unbalanced RCA output jacks.
Audio signals outputs.
y
Fader start jack
Use this when your mixer has Fader Start
function with 3.5 mm stereo mini cord.
u
Digital output jack
Digital data is available from this jack.
Use 75 /ohms pin cord for connection.
We recommend you use braided wire type
shielded cable.
NOTE: The playback level after analog
conversion is set to -6dB of the usual
level.
(2) Rear panel
CAUTION:
Do not turn off the power while a disc is
loading or being ejected. Otherwise loading
mechanism may be damaged.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-S3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-S3000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 5,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info