614642
7
Zoom out
Zoom in
Previous page
1/36
Next page
7
ENGLISH
2
CONNECTIONS/INSTALLATION/
INSTALLING THE 7(17cm) RECORD ADAPTOR
(1)CONNECTIONS
1. Turn off the POWER switch.
2. Connect the RCA pin cords between the DN-S3000 outputs and inputs of your mixer.
3. If your mixer has Fader Start function such as our DENON DN-X800 or DN-X400, connect FADER 1, 2 jacks to
the mixer using 3.5 mm stereo mini cord.
4. If you have a DENON DN-X800 mixer, you can use the X-Effect function to control the Hot Starts, Samplers
and Brake from the crossfader to get wide variety of operation.
CH1 CH2 CH3 CH4
FADE
Rch1
FADE
Rch2
DN-X400
LINE OUT
FADER
DN-S3000
X'EFFECT
IN
X'EFFECT
OUT
3.5 mm stereo mini cord
RCA cord
Fig. 1 : Fader start connections example 1 Fig. 2 : X-Effect connections example 1
CH1 CH2 CH3 CH4
FADE
Rch3
FADE
Rch4
X'EFFECT
DN-X800
LINE OUT
FADER
DN-S3000
CD1
X'EFFECT
IN
X'EFFECT
OUT
LINE OUT
FADER
DN-S3000 or DN-S5000
CD2
X'EFFECT
IN
X'EFFECT
OUT
X-EFFECT playback is possible with the CD 1 and
CD 2.
The memos of player and player can be compared
when the CD players are connected by X-EFFECT.
Relay play
(2)INSTALLATION
The DN-S3000 will work normally when the unit is installed with in 20 degrees off the level surface.
If the unit is titled excessively, the disc may not be loaded properly.
NOTE:
Standing up of playback slows unusually after trans porting the product.At the time, push center of the
!1 Scratch Disc lightly.
MAX 20°
Front
1. Remove a screw (Hexagon socket head)
and pull out Stabilizer, Scratch disc, Slip mat,
Slip sheet (White) and Anti-static sheet
(Black).
2. Set Adaptor in the hole of 7 record.
3. Install Stabilizer in Adaptor.
4. Fix Adaptor with 3 screws. (<head).
5. Install Slip sheet (White), Slip mat and 7
(17cm) record adaptor in Shaft of the product.
(Do not install Anti-static sheet (Black).)
Attention
Fit the D shape of Shaft to the D hole of
Stabilizer.
6. Install a screw (Hexagon socket head)
through Washer.
B
A
B
(3)INSTALLING THE 7 (17cm) RECORD ADAPTOR
Your own 7 (17cm) vinyl record can be installed on this product by using the provided adaptor.
This original design grants you the freedom to use your favorite vinyl record for that ultimate analog turntable feel.
*Make sure the record used is flat and not warped.
7 (17cm) record adaptor accessories
q Adaptor......................................1
w Screw(<head) ..........................3
e Washer(Reserve) ......................1
NOTE:
When RECORD to be used and friction of Slip
mat are small, it may be unable to playback
normally.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-S3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-S3000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 5,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info