498717
39
Zoom out
Zoom in
Previous page
1/96
Next page
ENGLISH
39
(2) Connecting the speaker terminals
* Read the amplifiers operating instructions carefully before connecting, and be sure to use properly.
* When connecting the equipment or changing the connections, be sure to turn the equipments power
switches off and unplug the power plugs from the AC power outlets.
2 Connecting the speaker terminals
1. Peel off the sheath from the tip of the connection cord, then firmly twist the wires by hand so that they
do not stick out and cause short-circuits.
2. Loosen the terminal by turning it counterclockwise, then insert the connection cord into the hole in the
speaker terminal.
3. Turn the terminal clockwise to tighten it.
Check that none of the core wires are sticking out of the hole.
The red side is the + side, the black side the “–” side.
To + side on amplifier (copper colored core wire)
NOTE: Make sure the core wires do not touch each other.
To “–” side on amplifier (silver colored core wire)
1
Sheath
2
3
CAUTION:
Be careful to interconnect the positive (+, red) and negative (“–”, black) sides and the left and right
speakers properly.
Connect the side of the included connection cord with the copper colored core wires to the red speaker
terminal.
To prevent circuit problems, never short-circuit copper and silver colored core wires or the left and right
cords.
Once the connections are completely, gently pull on the speaker cords to make sure they are securely
connected.
When installing, carefully examine the place and method of installation for safety.
When using a stand, brackets, etc., follow the instructions included with the stand or brackets and check for
safety before installing and using. Denon will accept no responsibility for damages or accidents caused by
the unit falling.
USING THE ACTIVE SUBWOOFER (DSW-3L)
1. Set the power switch to the ON position.
When the units AC power cord is plugged into a switched AC outlet on the amplifier, if the power switch
is left at the ON position, the units power turns on and off automatically when the amplifiers power is
turned on and off.
If the AC power cord is not plugged into a switched AC outlet on the amplifier, set the units power switch
to the ON position after turning on the amplifiers power. When turning the power off, set the units
power switch to the OFF position before turning off the amplifiers power.
2. Adjust the volume using the volume adjustment control.
For details, see PART NAMES AND FUNCTIONS.
REMOVING THE SPEAKER NET (SC-A3L, SC-C3L)
* The net on the front of the speaker systems (SC-A3L, SC-C3L) can be removed.
To remove, grasp both sides of the net and pull forward.
To mount, line up the holes in the four corners of the speaker net with the projecting pieces in the four corners
of the cabinet and press in.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-550SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-550SD in the language / languages: German as an attachment in your email.

The manual is 10,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info