498717
19
Zoom out
Zoom in
Previous page
1/96
Next page
ENGLISH
19
OPERATION
3
3
Before operating
When pressed, the power turns on and the
display lights. The sound is muted for several
seconds, after which the unit operates
normally.
When pressed again, the power turns off, the
standby mode is set and the display turns off.
Whenever the ON/STANDBY button is in the
STANDBY state, the apparatus is still
connected on AC line voltage. Please be sure
to unplug the cord when you leave home for,
say, a vacation.
12
1
Refer to CONNECTIONS (pages 6 to 10) and
check that all connections are correct.
(Main unit) (Remote control unit)
2
1
3
5
Playing the input source
1,3
5
3
1
Select the input source to be played.
AUTO PCM DTS
Selecting the external input (EXT. IN) mode
Press the EXT. IN to switch the external input.
Selecting the AUTO, PCM and DTS modes
The mode switches as shown below each
time the INPUT MODE button is pressed.
Input mode selection function
Different input modes can be selected for the different
input sources. The selected input modes for the
separate input sources are stored in the memory.
q AUTO (auto mode)
In this mode, the types of signals being input to the
digital and analog input jacks for the selected input
source are detected and the program in the AVR-
550SDs surround decoder is selected automatically
upon playback. This mode can be selected for all
input sources other than TUNER.
The presence or absence of digital signals is
detected, the signals input to the digital input jacks
are identified and decoding and playback are
performed automatically in DTS, Dolby Digital or
PCM (2 channel stereo) format. If no digital signal is
being input, the analog input jacks are selected.
Use this mode to play Dolby Digital signals.
w PCM (exclusive PCM signal playback mode)
Decoding and playback are only performed when
PCM signals are being input.
Note that noise may be generated when using this
mode to play signals other than PCM signals.
e DTS (exclusive DTS signal playback mode)
Decoding and playback are only performed when
DTS signals are being input.
r ANALOG (exclusive analog audio signal playback
mode)
The signals input to the analog input jacks are
decoded and played.
t EXT. IN (external decoder input jack selection mode)
The signals being input to the external decoder
input jacks are played without passing through the
surround circuitry.
2
Select the input mode.
Selecting the analog mode
Press the ANALOG button to switch to the
analog input.
FUNCTION / SELECT
(Main unit) (Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
2
Set the remote control units slide switch to the
AUDIO position. (only when operating with the
remote control unit)
3
Turn on the power.
Press the power operation switch (button).
(Main unit)
Example: DVD
Light
Power operation indicator
2
3
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-550SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-550SD in the language / languages: German as an attachment in your email.

The manual is 10,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info