498717
11
Zoom out
Zoom in
Previous page
1/96
Next page
ENGLISH
--OPTICAL 2OPTICAL 1
DVD/VDP
11
SETTING UP THE SYSTEM
Once all connections with other AV components have been completed as described in CONNECTIONS (see
pages 6 to 10), make the various settings described below on the display.
These settings are required to set up the listening rooms AV system centered around the this unit.
Use the following buttons to set up the system:
SYSTEM SETUP button
Press this to display the system setup on the display.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
CURSOR buttons (, ª,
0
,
1
)
Press this change what appears on the display.
10
2
Use the following buttons to set up the system:
1
Set the slide switch to AUDIO.
System setup items and default values (set upon shipment from the factory)
System setup Default settings
Speaker
Configuration
Subwoofer
mode
Digital In
Assignment
Input the combination of speakers in your
system and their corresponding sizes (SMALL
for regular speakers, LARGE for full-size, full-
range) to automatically set the composition of
the signals output from the speakers and the
frequency response.
This selects the subwoofer speaker for playing
deep bass signals.
This assigns the digital input jacks
for the different input sources.
Digital
Inputs
Input
source
Front Sp.
Small
Center
Sp.
Surround
Sp.
Surround
Back Sp.
Small Small None
LFE (Normal)
Front
L
Center
3.6 m
3.6 m
COAXIAL
VCR DVD/VDP
Delay Time
This parameter is for optimizing the timing with
which the audio signals are produced from the
speakers and subwoofer according to the
listening position.
NOTES:
The AVR-550SDs on-screen display function is designed for use with high resolution monitor TVs, so it may
be difficult to read small characters on TVs with small screens or low resolutions.
The setup menu is not displayed when headphones are being used.
Subwoofer
Yes
Crossover
Frequency
Set the frequency (Hz) below which the bass
sound of the various speakers is to be output
from the subwoofer.
150 Hz
Front
R
3.6 m
Surround
L
3.0 m
Surround
R
3.0 m
Surround
Back
None
Subwoofer
3.6 m
Front
L
Center
0 dB 0 dB
Channel Level
This adjusts the volume of the signals output
from the speakers and subwoofer for the
different channels in order to obtain optimum
effects.
Front
R
0 dB
Surround
L
0 dB
Surround
R
0 dB
Surround
Back
None
Subwoofer
0 dB
TV/DBS
Video In
Assignment
This assigns the component video
input jacks for the different video
input sources.
Compone
nt Inputs
Input
source
VIDEO 1 VIDEO 2
TV/DBS
--
--
System setup Default settings
Ext. In SW
Level
Set the Ext. In Subwoofer channel playback level. Ext. In SW Level = +15 dB
On Screen
Display
This sets whether or not to display the on-
screen display that appears on the monitor
screen when the controls on the remote control
unit or main unit are operated.
ON
Before setting up the system
2
Press the SYSTEM SETUP button to enter the
setting.
SYSTEM SETUP
1
Check that all the components are correct, then press the POWER operation
switch on the main unit to turn on the power.
(Main unit)
NOTE: Please make sure the AUDIO position of
the slide switch on the remote control unit.
3
Press the (down) and ENTER button to switch
to the SPEAKER CONFIGURATION SET UP.
NOTE:
Press the SYSTEM SETUP button again to finish system set up. System set up can be finished at any time.
The changes to the settings made up to that point are entered.
Auto Surround
Mode
Auto surround mode function setting. Auto Surround Mode = ON
--
--
--
--
--
--
--
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-550SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-550SD in the language / languages: German as an attachment in your email.

The manual is 10,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info