Remote control unit
• For details on the functions of these parts, refer to the pages given in parentheses ( ).
SYSTEM SETUP button ...............(10)
Test tone button...........................(24)
Surround buttons .........................(21)
Tuner system buttons..................(15)
System buttons............................(15)
Multi source button .....................(23)
INPUT MODE selector
buttons.........................................(20)
Mode selector
switches.......................................(15)
Input source selector
buttons.........................................(20)
Master volume control
buttons.........................................(21)
Tuner buttons...............................(15)
Power button ...............................(20)
MUTING button ...........................(22)
SURROUND PARAMETER
button...........................................(25)
Cursor buttons .............................(10)
STATUS button.............................(22)
Remote control signal
transmitter ...................................(15)
7
SETTING UP THE SYSTEM
• Once all connections with other AV components have been completed as described in “CONNECTIONS”
(see pages 4 to 8), make the various settings described below on the monitor screen using the AVR-2802’s
on-screen display function.
These settings are required to set up the listening room’s AV system centered around the AVR-2802.
• Use the following buttons to set up the system:
• System setup items and default values (set upon shipment from the factory)
System setup Default settings
q
w
r
t
y
Speaker
Configuration
Subwoofer
mode
SB CH Auto
Flag Detect
Channel Level
Digital In
Assignment
On Screen
Display
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE for
full-size, full-range) to automatically set the composition of the
signals output from the speakers and the frequency response.
This selects the subwoofer speaker for playing deep bass
signals.
Set the method of playing the surround backchannel for digital
signals.
This adjusts the volume of the signals output from the speakers
and subwoofer for the different channels in order to obtain
optimum effects.
This assigns the digital input jacks for the different
input sources.
This sets whether or not to display the on-screen display that
appears on the monitor screen when the controls on the remote
control unit or main unit are operated.
Input
source
Digital
Inputs
Front Sp.
Large
Center Sp. Surround Sp.SubWoofer
Small SmallYes
LFE
Front L & R Center Surround L & RSub Woofer
3.6 m (12 ft) 3.6 m (12 ft) 3.0 m (10 ft)3.6 m (12 ft)
Front L
Front R Center
Surround
R
—Subwoofer
0 dB 0 dB 0 dB 0 dB —0 dB
CD DVD TV/DBS
CDR
/TAPE
VDP —
COAXIAL
OPTICAL
1
OPTICAL
2
OPTICAL
3
OFF —
On Screen Display = ON
Surround Back Sp.
Small / 1spkr
DTS-ES / 6.1 Source Auto Flag Detect Mode = OFF
e
Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and subwoofer
according to the listening position.
Surround Back
3.0 m (10 ft)
Surround
Back
0 dB
Surround
L
0 dB
VCR-2
OFF
VCR-1
OFF
A1 ~ A8 87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 / 90.1 MHz
B1 ~ B8 522 / 603 / 999 / 1404 / 1611 kHz, 90.1 / 90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
u
Auto Tuner
Preset
FM stations are received automatically and stored in the
memory.
Crossover
Frequency
Set the frequency (Hz) below which the bass sound of the
various speakers is to be output from the subwoofer.
80 Hz
ON SCREEN button .....................(22)
DVD SETUP button......................(17)
Channel select/enter
button...........................................(10)
LEDs (indicators)..........................(19)
SYSTEM CALL buttons................(18)
SPEAKER select button..............(20)
USE/LEARN selector
button...........................................(18)
NOTES:
• The shaded buttons do not function with the AVR-2802.
(Nothing happens when they are pressed.)
• The button indicated , however, can be used with the learning function.
SYSTEM SETUP button
Press this to display the system setup menu.
ENTER button
Press this to switch the display on the screen.
Also use this button to complete the setting on the screen.
CURSOR buttons
and : Use these to move the cursors (
0 and 1) to
the left and right on the screen.
and : Use these to move the cursors (• and ª) up
and down on the screen.
