10
ENGLISH
Point the remote control unit at the remote control
sensor as shown on the diagram at the left.
NOTES:
• The remote control unit can be used from a straight
distance of approximately 7 meters, but this
distance will shorten or operation will become
difficult if there are obstacles between the remote
control unit and the remote control sensor, if the
remote control sensor is exposed to direct sunlight
or other strong light, or if operated from an angle.
• Neon signs or other devices emitting pulse-type
noise nearby may result in malfunction, so keep the
set as far away from such devices as possible.
Approx. 7 m
30°
30°
Range of operation of the remote control unit
USING THE REMOTE CONTROL UNIT
Following the procedure outlined below, insert the batteries before using the remote control unit.
Inserting the batteries
q Press as shown by the arrow
and slide off.
w Insert the R6P/AA batteries properly,
as shown on the diagram.
e Close the lid.
NOTES:
• Use only R6P/AA batteries for replacement.
• Be sure the polarities are correct. (See the illustration inside the battery compartment.)
• Remove the batteries if the remote control transmitter will not be used for an extended period of time.
• If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact
with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
• Have replacement batteries on hand so that the old batteries can be replaced as quickly as possible when the
time comes.
• Even if less than a year has passed, replace the batteries with new ones if the set does not operate even when
the remote control unit is operated nearby the set. (The included battery is only for verifying operation. Replace
it with a new battery as soon as possible.)
7
Remote control unit
• For details on the functions of these parts, refer to the pages given in parentheses ( ).
VIDEO SELECT button.................(24)
Cursor buttons.................(11, 20, 27)
TEST TONE button ......................(25)
System buttons .....................(19, 20)
Input source selector buttons
...............................................(19~22)
SYSTEM SETUP/
SETUP button ........................(11, 20)
SURROUND
buttons.............................(22, 25, 31)
Mode select
switches ................................(19~21)
Power buttons.................(12, 19~21)
Tuner system/System
buttons.............................(19, 20, 33)
MUTING button ...........................(24)
Master volume control
buttons.........................................(22)
SURROUND BACK/
RETURN button .....................(20, 28)
Remote control signal
transmitter ...................................(10)
SURROUND PARAMETER
button.....................................(20, 26)
CH SELECT (channel select)/
ENTER button............(11, 20, 26, 27)
DIMMER button...........................(24)
INPUT MODE selector
buttons...................................(22, 23)
LED (indicator) .......................(19, 21)
ON SCREEN/
DISPLAY button .....................(20, 29)
SPEAKER button..........................(21)
