498673
19
Zoom out
Zoom in
Previous page
1/59
Next page
19
ENGLISH
2
Select the Dolby Surround Pro Logic II mode.
(Main unit) (Remote control unit)
The Dolby Pro Logic indicator lights.
Display Light
3
Play a program source with the
mark.
For operating instructions, refer to the
manuals of the respective components.
4
Set the surround parameter mode.
(Main unit) (Remote control unit)
MODE cinema
Display
To perform this operation from the remote
control unit, check that the mode selector
switch is set to AUDIO.
5
Select the optimum mode for the source.
(Main unit) (Remote control unit)
or or
MODE musicMODE cinemaMODE DOLBY PL
6
Set the surround parameters according to the
mode.
(Main unit) (Remote control unit)
The mode switches as shown below each
time the button is pressed.
MODE Dolby PL
CINEMA EQ
DEFAULT
MODE CINEMA
CINEMA EQ
DEFAULT
MODE MUSIC
PANORAMA
DIMENSION
CENTER WIDTH
DEFAULT
7
Set the various surround parameters.
CINEMA EQ setting
ON OFF
or or
CINEMA EQ OFF
PANORAMA setting
ON OFF
or or
PANORAMA OFF
DIMENSION setting
0 3 6
or or
DIMENSION 3
CENTER WIDTH setting
0
CENTER WIDTH 3
4 7
or or
DEFAULT setting
YES Y/N NO
or or
DEFAULT Y/N
Select Yes to reset to the factory defaults.
Surround parameters q
Pro Logic II Mode:
The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround.
The Music mode is recommended as the standard mode for autosound music systems (no video), and is
optional for A/V systems.
The Dolby PL mode offers the same robust surround processing as original Pro Logic in case the source
contents is not of optimum quality.
Select one of the modes (Cinema, Music or Dolby PL).
Panorama Control:
This mode extends the front stereo image to include the surround speakers for an exciting wraparound
effect with side wall imaging.
Select OFF or ON.
Dimension Control:
This control gradually adjust the soundfield either towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the center speaker; only from the left/right
speakers as a phantom image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
2
1 1 3
4, 5, 6, 7, 8
5, 6, 7, 8
5, 6, 7, 8
5, 6, 7, 8
1
1
2
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
Playback with a digital input
1
Select the input source.
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 12).
Example: DVD
w Set the input mode to AUTO or DTS.
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
2
Select the Dolby/DTS Surround mode.
(Main unit) (Remote control unit)
3
Play a program source with the ,
mark.
DIGITAL
The DTS indicator lights when
playing DTS sources.
Light
The Dolby Digital indicator lights
when playing Dolby Digital
sources.
Light
Stop pressing buttons once you have completed
setting the surround parameters. After several
seconds the normal display reappears and the
settings you have made are automatically set.
NOTE:
When making parameter settings, the display
will return to the regular condition several
seconds after the last button was pressed and
the setting will be completed.
Press the surround parameter button to switch to the
CINEMA EQ, PANORAMA setting.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-1404 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1404 in the language / languages: English, German as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info