571792
9
Zoom out
Zoom in
Previous page
1/20
Next page
GUI Menu Map Playback Information Troubleshooting
NOTE
“Dynamic Volume” and “Night Mode” cannot be used jointly.
“Dynamic Volume” can only be set when auto setup has been
performed.
“Dynamic Volume” cannot be set in the following situations.
If “Auto Setup” fails to be completed.
After running Auto Setup, when the number of used speakers has
increased from the number of measured speakers.
When “Room EQ” is set to “OFF” or “Manual”, “Dynamic Volume”
is automatically set to “OFF”.
Before running Auto Setup and after running Auto Setup, if the
number of speakers has increased or you pressed <DYNAMIC EQ>
or [PARA], “Run Audyssey” is displayed. In this case, either perform
Auto Setup, or return to the setting after running Auto Setup with
“Auto Setup” – “Parameter Check” – “Restore”.
Setting
Can be set when “Dynamic Volume” is set to “ON”.
Set Dynamic Volume effect.
[Selectable items]
Midnight
: High setting affects volume the most, causing all sounds
to be of equal loudness.
Evening
: Middle setting prevents loud and soft sounds from
being much louder and softer respectively than average
sounds.
Day
: Low setting provides the least adjustments to the
loudest and softest of sounds.
NOTE
“Setting” can only be set when auto setup has been performed.
“Setting” cannot be selected in the following cases.
If “Auto Setup” fails to be completed.
After running Auto Setup, when the number of used speakers has
increased from the number of measured speakers.
If “Dynamic Volume” setting is “OFF”.
About Dynamic Volume
Audyssey Dynamic Volume™ solves the problem of large variations
in volume level between television programs, commercials, and
between the soft and loud passages of movies.
Dynamic Volume looks at the preferred volume setting by the user
and then monitors how the volume of program material is being
perceived by listeners in real time to decide whether an adjustment
is needed. Whenever necessary, Dynamic Volume makes the
necessary rapid or gradual adjustments to maintain the desired
playback volume level while optimizing the dynamic range.
Audyssey Dynamic EQ is integrated into Dynamic Volume so that
as the playback volume is adjusted automatically, the perceived
bass response, tonal balance, surround impression, and dialog
clarity remain the same whether watching movies, flipping between
television channels, or changing from stereo to surround sound
content.
About Dynamic EQ
Audyssey Dynamic EQ™ solves the problem of deteriorating sound
quality as volume is decreased by taking into account human
perception and room acoustics.
Dynamic EQ selects the correct frequency response and surround
levels moment-by-moment at any user-selected volume setting. The
result is bass response, tonal balance, and surround impression that
remain constant despite changes in volume. Dynamic EQ combines
information from incoming source levels with actual output sound
levels in the room, a prerequisite for delivering a loudness correction
solution.
Audyssey Dynamic EQ works in tandem with Audyssey MultEQ
XT to provide well-balanced sound for every listener at any volume
level.
NOTE
You cannot use either the “Dynamic EQ” or “Dynamic Volume”
function if you conduct auto setup when the microphone connected
to the V.AUX L terminal is not the prescribed accessory.
Setup
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVP-A1HDCI AVR-5308CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVP-A1HDCI AVR-5308CI in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVP-A1HDCI AVR-5308CI

Denon AVP-A1HDCI AVR-5308CI User Manual - English - 131 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info