571792
8
Zoom out
Zoom in
Previous page
1/20
Next page
GUI Menu Map Playback Information Troubleshooting
s
Audyssey Settings
Select Room EQ, Dynamic EQ and Dynamic Volume.
Room EQ
[Selectable items]
Audyssey
: Optimize frequency response of all speakers.
Audyssey Byp. L/R
: Optimize frequency response of speakers
except front L and R speakers.
Audyssey Flat
: Optimize frequency response of all speakers
to flat response.
Manual
: Apply frequency response set with “Manual
EQ”.
OFF
: Turn equalizer off.
Operating from the main unit or main remote
control unit
Press ROOM EQ.
Audyssey Audyssey Byp. L/R
Audyssey Flat
Manual
OFF
When “Audyssey”, “Audyssey Byp. L/R” or “Audyssey Flat” is
selected, “ ” lights.
After running Auto Setup, if the Speaker Configuration, Distance,
Channel Level, and Crossover Frequency have changed without
increasing the number of speakers measured, only
lights.
“Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can be
selected after the auto setup procedure has been performed.
After performing “Auto Setup”, the “Room EQ” setting automatically
becomes “Audyssey”.
If the settings of speakers for which “None” has been determined
at “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R”
and “Audyssey Flat” cannot be selected. Either perform Auto Setup
again, or return to the setting after running Auto Setup with “Auto
Setup” – “Parameter Check” – “Restore”.
When using headphones or analog EXT. IN mode, “Room EQ”
cannot used.
Dynamic EQ
Audyssey Dynamic EQ™ solves the problem of deteriorating sound
quality as volume is decreased by taking into account human
perception and room acoustics.
Audyssey Dynamic EQ works in tandem with Audyssey MultEQ
®
XT
to provide well-balanced sound for every listener at any volume level.
[Selectable items]
ON
: Use Dynamic EQ function.
OFF
: Do not use Dynamic EQ function.
Operating from the main unit or main remote
control unit
Press <DYNAMIC EQ> or [PARA].
Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF
Dynamic EQ / Volume : OFF
“Dynamic EQ” can only be set when auto setup has been performed.
After performing “Auto Setup”, the “Dynamic EQ” setting
automatically becomes “ON”.
“Dynamic EQ” cannot be set in the following situations.
If “Auto Setup” fails to be completed.
After running Auto Setup, when the number of used speakers has
increased from the number of measured speakers.
When “Room EQ” is set to “OFF” or “Manual”, “Dynamic EQ” is
automatically set to “OFF”.
Before running Auto Setup and after running Auto Setup, if the
number of speakers has increased or you pressed <DYNAMIC EQ>
or [PARA], “Run Audyssey” is displayed. In this case, either perform
Auto Setup, or return to the setting after running Auto Setup with
“Auto Setup” – “Parameter Check” – “Restore”.
n Operating conditions for each function
Dynamic EQ : When “Room EQ” is set to “Audyssey”,
Audyssey Byp. L/R” or Audyssey Flat”
Dynamic Volume : When “Dynamic EQ” is set to “ON”
Setting : When “Dynamic Volume” is set to “ON”
Room EQ
Dynamic EQ
Dynamic Volume
Setting
NOTE
When you set “Dynamic EQ” to “ON”, “Tone” and “Night Mode”
cannot be used.
Setup
Dynamic Volume
Audyssey Dynamic Volume™ solves the problem of large variations
in volume level between television programs, commercials, and
between the soft and loud passages of movies.
Audyssey Dynamic EQ is integrated into Dynamic Volume so that as
the playback volume is adjusted automatically, the perceived bass
response, tonal balance, surround impression, and dialog clarity
remain the same.
[Selectable items]
ON
: Use Dynamic Volume.
The Dynamic Volume effect will be at the level of the
“Setting”.
OFF
: Do not use Dynamic Volume.
Operating from the main unit or main remote
control unit
Press <DYNAMIC EQ> or [PARA].
Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF
Dynamic EQ / Volume : OFF
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVP-A1HDCI AVR-5308CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVP-A1HDCI AVR-5308CI in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVP-A1HDCI AVR-5308CI

Denon AVP-A1HDCI AVR-5308CI User Manual - English - 131 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info