133693
32
Zoom out
Zoom in
Previous page
1/92
Next page
SINGLE SPLIT
ENGLISH
12
Knockout
part
Ensure that the hose is not bent for the whole
length A of the appliance.
- Using a wall borer-cutter (not provided), make a hole for
the refrigerant connections to pass through.
NB:
if you do not have a borer-cutter available, the hole
can be made using a drill and drilling lots of holes close
to each other around the marked circumference.
The hole must slope gently downwards towards the
exterior.
Connecting the condensate outlet pipe
The indoor unit is fitted with a condensate outlet pipe to
which a drain pipe must be connected that leads to a suita-
ble place for drainage.
- Connect an insulated drain pipe (øi 16 mm) to the
outlet pipe connection using a hose clamp or adhesive
tape.
- Check that the condensate flows out regularly.
The drain pipe must have a minimum slope of 3%
towards the drain.
Check all the joints for leaks.
Lag the joints.
Avoid upturned sections.
Passing through the connections
- Pass the condensate drain pipe and the flexible sheath
containing the refrigerant connections through the pre-
viously made hole.
- Fit
the indoor unit onto the mounting plate, passing the
pipes through the previously made hole.
To avoid damaging the fittings, before passing the
sheath through the hole in the wall, it is advisable to
protect the ends of the push-fit connections with the
plugs provided in the kit or with adhesive paper tape.
2~5 cm
ESTERNO
INTERNO
Wall
Insulating material
ESTERNO
INTERNO
refrigerant
connections
condensate
drain pipe
Before installing the indoor unit, mount the silver ion and
biological electrostatic filters (if ordered).
To install the filters:
- Take out the mesh filter.
- Attach the silver ion and the biological electrostatic (if
ordered) filters.
- Refit the filters inside the indoor unit, proceeding in the
reverse order to above.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi pls 120 ar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi pls 120 ar in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info