10
FAN MODE (g. 14)
When using this mode, the air exhaust hose (B2) does not need
to be attached to the appliance.
To correctly set this mode:
• Touch the MODE, key until the fan symbol appears.
• Select the desired fan speed by touching the key. .
The speeds available are:
Minimum speed: when maximum silent operation is
desired.
Medium speed: when the noise level needs to be
low but with a good fan level.
Maximum speed: for maximum fan power.
SELECT THE TEMPERATURE SCALE
g. 15)
The temperature can be displayed in °C or °F.
To change the temperature unit of measure keep depressed
both keys “+” e “-” for about 10 sec.
FUNCTIONS AVAILABLE FROM THE REMOTE CONTROL
ONLY
(See page 4 - D)
FUNCTION g. 16)
REAL FEEL is a De’Longhi technology that checks the relative hu-
midity and regulates the temperature at the same time. These
are the two most important elements for comfort.
Compare to traditional air conditioning, REAL FEEL maintains
comfort conditions over time, automatically modulating the
compressor and fan speed.
To activate the function, touch the
key.
The “REAL FEEL” status indicator (C6) becomes white for approx.
1 min. to indicate that the appliance is checking the room con-
ditions.
After a while the “REAL FEEL” status indicator (C6) changes col-
our as it approaches comfort conditions (see graph below).
Perfect!
Please note:
• Comfort is subjective. Consequently, dierent individuals
can judge the same environmental conditions dierently.
• In particularly severe environmental conditions (large
room size, high outdoor temperature or humidity, little
room insulation, many people or large thermal loads in the
room, exposure to the sun, etc.), the appliance may not be
able to reach comfort conditions.
SILENT FUNCTION CAN ONLY BE ACTIVATED IN AIR
CONDITIONER MODE g. 17)
By activating this function in air conditioner mode, the noise
level of the appliance is further reduced.
To activate, touch the
(D6) key.
The display shows the related indicator light (C13).
PROGRAMMING THE TIMER g. 18)
The timer allows for the delayed start up or shut down of the
appliance. This function will prevent wasting electricity by opti-
mising the operating periods.
How to program delayed start up
• Plug in the appliance and set to standby.
• Touch the timer key (D8): the timer symbol (C10) and hours
light up.
• Use the + (D2.2) or - (D2.1) key to set the number of hours
until the appliance should start up.
• The appliance will start to operate in the same operating
mode that was previously set.
Start up can be programmed at any time within the 24 hours
that follow. A few seconds after the timer is set, the setting is
acquired. The timer symbol stays lit and the display returns to
standby.
To cancel the timer program, touch the timer key (D8). twice.The
timer symbol (C10) will go o.
How to program delayed shut down
• While the appliance is on in any operating mode, delayed
shut down can be programmed.
• Touch the timer key (D8): The timer symbol (C10) and hours
light up.
• Use the + (D2.2) o - (D2.1) key to set the number of
hours until the appliance should shut down.
A few seconds after the timer is set, the setting is acquired, the
display shows the operating mode and the timer symbol stays
lit.
Once the set time is elapsed, the air conditioner goes into Standby.
To cancel the timer program, touch the timer key (D8), twice.
The timer symbol (C10) will go o.
ORANGE LIGHT:Environmental conditions
dier signicantly from comfort conditions
GREEN LIGHT: Environmental conditions
satisfactory for most people, almost per-
fect.
BLUE LIGHT:
Perfect environmental
conditions
