800385
15
Zoom out
Zoom in
Previous page
1/123
Next page
14
(C3) or (C4) key.
Select the desired fan speed by pressing the (C5) key.
The speeds available are:
Minimum air ow: when maximum silent operation
is desired.
Maximum air ow: to reach the desired
temperature as soon as possible.
Auto air ow: The appliance automatically chooses
the best fan speed based on the temperature selected
and the environmental conditions.
The most suitable temperatures during the summer range from 24
to 27°C. However, setting the temperature signicantly lower than
the outdoor temperature is not recommended.
DEHUMIDIFYING MODE
This is ideal for reducing humidity in the room (spring and au-
tumn, damp rooms, rainy periods, etc). For this type of use, the
appliance must be set up as for air conditioning mode. That is, the
air exhaust hose (B1) must be tted to the appliance to allow the
humidity to be discharged outside.
To correctly set this mode:
Press repeatedly the MODE key (C2) until the dehumidify-
ing indicator (C10) appears.
The available air ow is:
Automatic air ow: the appliance automatically
sets the best ventilation speed according to the envi-
ronmental conditions.
Note: in case of high humidity in the environment, it is possible
to discharge the condensate continuously by connecting a suit-
able hose to the upper drain connection (A11), allowing the
water to ow into a container.
Make sure that the water does not overow onto the oor and
that the drain hose is not blocked or folded (Fig. 4).
FAN MODE
When using this mode, the air exhaust hose (B1) does not need
to be attached to the appliance.
To correctly set this mode:
Press repeatedly the MODE (C2) key until the fan indicator
lights on.
Pressing repeatedly the (C5) key till the desired air
ow is selected.
The available air ows are:
Minimum air ow: when most silent operation is
desired.
Maximum air ow: for maximum performance.
SELECT THE TEMPERATURE SCALE
The temperature can be displayed in °C or °F. To change the tem-
perature unit of measure select the air conditioning mode then
press both the decrease (C3) and increase (C4) keys for
about 10 sec. The change of the unit of measurement is con-
rmed by an acoustic signal.
SETTING THE TIMER
The timer allows the delayed start up or shut down of the appli-
ance. This function will prevent wasting electricity by optimising
the operating periods.
How to program delayed shut down
While the appliance is on in any operating mode, delayed
shut down can be programmed.
Press the Timer button (C6): the timer indicator (C8) and
hours light up.
Use buttons (C3) or (C4) to set the number of hours
after which the appliance should shut down.
A few seconds after the timer is set, the setting is acquired, the
display shows the operating mode and the timer indicator stays
lit.
At the pre-set time, the air conditioner goes into Standby.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi PAC ES Pinguino at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi PAC ES Pinguino in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 58.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info