Manual DeLonghi ETAM 29.510.B - AUTENTICA (page 17 of 21) (English)

562576

Zoom out

Zoom in

1/21

soft water

slightly hard

water

hard water

very hard

water

13. Empty the container used to collect the descaler solution

and replace it empty under the hot water spout.

14. Turn the hot water/steam dial

back to the I position to

start rinsing. Hot water comes out of the spout.

15. When the water tank is completely empty, the

icon and light ash on the touch screen. Turn the hot

water/steam dial

to the O position;

16. Extract the water tank and ll with fresh water up to the

MAX level;

17. Empty the container used to collect the descaler solution

and replace it empty under the hot water spout;

18. Turn the hot water/steam dial to the I position.

19. The appliance begins rinsing again and ends with water

being delivered from the coee spout (A9) (

Danger

of burns! )

20. Turn the hot water/steam dial to the O position and top up

the tank with fresh water to the MAX level.

Descaling is complete.

SETTING WATER HARDNESS

The light comes on after a period of time established accord-

ing to water hardness.

The machine is set by default for a hardness value of 4. The ma-

chine can also be programmed according to the hardness of the

mains water in the various regions so that the machine needs to

be descaled less often.

Measuring water hardness

1. Remove the “TOTAL HARDNESS TEST” indicator paper from

its pack (attached to the English instructions).

2. Immerse the paper completely in a glass of water for one

second.

3. Remove the paper from the water and shake lightly. After

about a minute, 1, 2, 3, or 4 red squares form, depending

on the hardness of the water. Each square corresponds to

one level.

Setting water hardness

1. With the appliance o (standby), but the main switch

pressed (g. 4);

2. Press the icon (B14) until the icon lights up, togeth-

er with the lights indicating the current setting;

2. Press the

icon (B13) to select the hardness identi-

ed with the indicator paper;

3. Press the

icon (B12) to conrm (or (B10) to

exit without making the modication).

The machine is now reprogrammed with the new water hard-

ness setting.

WATER SOFTENER FILTER *CERTAIN MODELS

ONLY

Certain models are tted with a water softener lter. If this is not

the case with your model, you are recommended to purchase

one from De’Longhi Customer Services.

To use the lter correctly, follow the instructions below.

Installing the lter

1. Remove the lter (C3) from the packaging.

2. Turn the date indicator disk (see g. 29) until the next two

months of use are displayed.

Please note

The lter lasts about two months if the appliance is used nor-

mally. If the coee machine is left unused with the lter in-

stalled, it will last a maximum of three weeks.

3. To activate the lter, run tap water through the hole in the

lter as shown in the gure until water comes out of the

openings at the side for more than a minute (g. 30).

4. Extract the tank (A18) from the appliance and ll with

water.

5. Insert the lter in the water tank and immerse it complete-

ly for about ten seconds, sloping it and pressing it lightly to

enable the air bubbles to escape (g. 31).

6. Insert the lter in the lter housing (g. 32) and press as

far as it will go.

7. Close the tank with the lid (g. 33), then replace the tank

in the machine.

8. Position a container under the hot water spout (min. ca-

pacity: 500 ml).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ETAM 29.510.B - AUTENTICA in the language / languages: English as an attachment in your email.

The manual is 11,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ETAM 29.510.B - AUTENTICA

DeLonghi ETAM 29.510.B - AUTENTICA User Manual - English - 21 pages

DeLonghi ETAM 29.510.B - AUTENTICA User Manual - German - 22 pages

DeLonghi ETAM 29.510.B - AUTENTICA User Manual - Dutch - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi ETAM 29.510.B - AUTENTICA Manual

Product: