Manual DeLonghi ETAM 29.510.B - AUTENTICA (page 12 of 21) (English)

562576

Zoom out

Zoom in

1/21

2 hours

3 hours

4. press the

icon (B12) to conrm (or (B10) to

exit without making the modication). The lights/icons go

o.

The auto-o time is now programmed.

ENERGY SAVING

Use this function to enable or disable energy saving. This mode

is active by default, reducing energy consumption while the ma-

chine is on in compliance with current European regulations. To

change the setting, proceed as follows:

1. With the appliance o (standby), but the main switch

pressed (g. 4);

2. press and hold the icon (B13) until the icon lights up;

3. press the

icon (B12) to select energy saving or

(B10) to deselect it.

The energy saving setting is now programmed.

Please note!

• When in energy saving mode, a few seconds may elapse

before the rst coee is delivered as the appliance must

heat up again.

DEFAULT VALUES RESET

This function resets all settings (temperature, auto-o, water

hardness, energy saving and all quantity settings are reset to

the default values).

1. With the appliance o (standby), but the main switch

pressed (g. 4);

2. press and hold the icon (B15) until the icons on the

touch screen (B) come on;

3. press the

icon (B12) to reset the default values (or

B10) to exit without making the modication). The icons

go o.

The settings and quantities have been reset to the default

values.

MAKING COFFEE

Selecting the coee taste

Turn the coee taste selection dial (B9) to set the required taste.

Turning it clockwise increases the quantity of coee beans the

appliance will grind and therefore the strength of the coee

obtained.

Turn the dial to MIN for an extra mild coee and to MAX for an

extra strong coee.

Please note :

• The rst time you use the appliance, you will need to make

a number of coees to identify the correct dial position

through trial and error.

• Do not turn the dial too far towards MAX, otherwise the

coee may be delivered too slowly (a drop at a time), par-

ticularly when making two cups of coee at the same time.

Selecting the quantity of coee in the cup

The appliance is set by default to automatically make the fol-

lowing quantities of coee:

coee requested icon quantity delivered

1 short coee

(≃40ml)

1 long coee

(≃120ml)

2 short coees

(≃40ml) x2

2 long coees

(≃120ml) x2

To change the quantity of coee the appliance delivers auto-

matically into the cup, proceed as described below:

- press and hold the

icon (B2) or icon (B6)

(depending on the quantity you want to modify) until the

icon ashes and all the alarm lights ash 4 times. When the

appliance starts delivering coee, release the icon;

- when the coee in the cup reaches the required level, press

the same icon again to memorise the new amount.

When the icon is pressed again, the new quantities have been

memorised.

Please note!

Programming the one coee quantity also programmes the

quantity of coee in the corresponding two cups.

Adjusting the coee mill

The coee mill is set by default to prepare coee correctly and

should not require regulating initially.

However, if after making the rst few coees you nd that the

coee is either too weak and not creamy enough or delivery is

too slow (a drop at a time), this can be corrected by adjusting

the grinding adjustment dial (g. 8).

Please note!

The grinding adjustment dial must only be turned when the

coee mill is in operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ETAM 29.510.B - AUTENTICA in the language / languages: English as an attachment in your email.

The manual is 11,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ETAM 29.510.B - AUTENTICA

DeLonghi ETAM 29.510.B - AUTENTICA User Manual - English - 21 pages

DeLonghi ETAM 29.510.B - AUTENTICA User Manual - German - 22 pages

DeLonghi ETAM 29.510.B - AUTENTICA User Manual - Dutch - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi ETAM 29.510.B - AUTENTICA Manual

Product: