562576
20
Zoom out
Zoom in
Previous page
1/21
Next page
19
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM POSSIBLE CAUSE SOLUTION
The coee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot
water (Please note: you can use the hot water
function).
The infuser (A17) has cooled down be-
cause 2/3 minutes have elapsed since
the last coee was made.
Before making the coee, heat the infuser by
rinsing using the rinse function (page 10).
A low coee temperature is set.
Set a higher coee temperature in the menu
(page11).
The coee is weak or not creamy
enough.
The coee is ground too coarsely. Turn the grinding adjustment dial one click
anticlockwise towards “1” while the coee mill
is in operation (g. 8). Continue one click at a
time until coee delivery is satisfactory. The
eect is only visible after delivering 2 coees
(see the section: Adjusting the coee mill” on
page 11).
The coee is unsuitable. Use pre-ground coee for espresso machines.
The coee is delivered too slowly or a
drop at a time.
The coee is ground too nely. Turn the grinding adjustment dial one click
clockwise towards “7” while the coee mill is
in operation (g. 8). Continue one click at a
time until coee delivery is satisfactory. The
eect is only visible after delivering 2 coees
(see the section: Adjusting the coee mill” on
page 11
).
Coee does not come out of one or
both of the spouts.
The spouts are blocked. Clean the spouts with a toothpick (g. 22).
The milk is not frothed Cappuccino maker dirty. Clean the cappuccino maker as described in the
corresponding section
(page 13)
.
Steam delivery stops A safety device stops steam delivery
after 3 minutes.
Wait and then enable the steam function
again.
The appliance does not come on The plug on the cord (A22) is not plug-
ged in.
Plug into the mains socket.
The main switch (A15) is not turned on. PRESS THE MAIN SWITCH FIG. 4.
The infuser cannot be extracted The appliance has not been turned o
correctly
Turn the appliance o by pressing the
button
(page 10).
The frothed milk has large bubbles The milk is not cold enough or is not
semi-skimmed.
You should ideally use skimmed or semi-skim-
med milk at refrigerator temperature (about
5°C). If the result is not as you wished, try
changing brand of milk.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ETAM 29.510.B - AUTENTICA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ETAM 29.510.B - AUTENTICA in the language / languages: English as an attachment in your email.

The manual is 11,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ETAM 29.510.B - AUTENTICA

DeLonghi ETAM 29.510.B - AUTENTICA User Manual - English - 21 pages

DeLonghi ETAM 29.510.B - AUTENTICA User Manual - German - 22 pages

DeLonghi ETAM 29.510.B - AUTENTICA User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info