Manual DeLonghi esam04.350.S (page 13 of 21) (English)

473850

Zoom out

Zoom in

1/21

4. Press the or button until the required language is

displayed;

5. Press the OK button to conrm;

6. Press the ESC button exit the menu.

Energy Saving

Use this function to enable or disable “Energy saving” mode.

When enabled, the function reduces energy consumption in

compliance with European regulations.

To enable or disable the function, proceed as follows:

1. Press the MENU button to enter the settings menu.

2. Press the or button until “Energy saving” is displayed;

3. Press the OK button. “Disable?” is displayed (or “Enable?”

if the function has already been disabled).

4. Press the OK button to disable or enable the function or

the ESC button to exit the menu.

When the function is active, if the machine is not used for

about 1 minute, “Energy saving” is displayed.

Please note!

• Toexit“Energysaving”mode,pressanybutton,thenpress

the button corresponding to the drink you want to make.

• Afewsecondsmayelapsebetween“Energysaving”mode

and delivery of the rst drink; “Preparation underway...” is

displayed.

Adjust time

To adjust the time on the display, proceed as follows:

1. Press the MENU button to enter the settings menu.

2. Press the or button until “Adjust time” is displayed;

3. Press the OK button. The hours ash on the display;

4. Press the or button to change the hours;

5. Press the OK button to conrm. The minutes ash on the

display;

6. Press the or button to change the minutes;

7. Press the OK button to conrm;

8. Press the ESC button to exit the settings menu.

Please note!

The time is displayed when the appliance is in stand-by or

energy saving mode. If the time has not been adjusted, “0:00”

ashes on the display.

Auto-Start

You can set the auto-start time in order to have the appliance

ready at a certain time (for example in the morning) so you can

make coee immediately.

Please note!

To enable this function, the time must be set correctly.

To enabled Auto-on, proceed as follows:

1. Press the MENU button to enter the settings menu.

2. Press the or button until “Auto-start” is displayed;

3. Press the OK button. “Enable?” is displayed;

4. Press the OK button. The hours ash on the display;

5. Press the or button to select the hours;

6. Press the OK button to conrm. The minutes ash on the

display;

7. Press the or button to change the minutes;

8. Press the OK button to conrm. The symbol appears

under “Auto-start” on the display.

9. Press the ESC button to exit the menu. When the appliance

is in stand-by, the symbol appears next to the clock

to indicate that auto-start has been programmed.

To disable the function:

1. Press the MENU button to enter the settings menu.

2. Press the or button until “Auto-start” is displayed;

3. Press the OK button. “Disable?” is displayed;

4. Press the OK button to conrm;

5. Press the ESC button to exit the menu. When the appliance

is in stand-by, the symbol is no longer displayed.

Auto-O (Stand-by)

The appliance is set by default to go o if not used for two

hours.

The time can be changed so that the appliance switches o

after 15 or 30 minutes, or after 1, 2 or 3 hours.

To re-programme Auto-o, proceed as follows:

1. Press the MENU button to enter the settings menu.

2. Press the or button until “Auto-o” is displayed;

3. Press the OK button;

4. Press the or button until the required time (15 or 30

minutes, or 1, 2 or 3 hours) is displayed;

5. Press the OK button to conrm;

6. Press the ESC button exit the menu.

Auto-o is programmed.

Setting the temperature

To modify the temperature of the water used to make the

coee, proceed as follows:

1. Press the MENU button to enter the settings menu.

2. Press the or button until “Set temperature” is

displayed;

3. Press the OK button;

4. Press the or button until the required temperature is

displayed (l = low; llll = high);

5. Press the OK button to conrm;

6. Press the ESC button exit the menu.

Setting water hardness

For instructions on setting water hardness, see page 17.

Statistics function

This displays statistics relating to the machine.

To display, proceed as follows:

1. Press the MENU button to enter the settings menu.

2. Press the or button until “Statistics” is displayed;

3. Press the OK button;

4. By pressing the or button, you can check:

- how many coees have been made;

- how many cappuccinos have been made;

- how many times the machine has been descaled;

- the total number of litres of water delivered.

5. Press the ESC button twice to exit the menu.

Default values (reset)

This resets all menu settings and programmed quantities back

to the default values (with the exception of the language which

remains as set). To reset all settings, proceed as follows:

1. Press the MENU button to enter the menu;

2. Press the or button until “Default values” is

displayed;

3. Press the OK button;

4. The message “Conrm?” is now displayed;

5. Press the OK button to conrm and exit.

MAKING COFFEE

Please note!

A few seconds may elapse between energy saving mode and

delivery of the rst coee.

Selecting the coee taste

The appliance is set by default to make coee with a standard

taste.

You can also choose one of these tastes:

Extra-mild taste

Mild taste

Standard taste

Strong taste

Extra-strong taste

To change the taste, press the button (g. 7)

repeatedly until the required taste is displayed.

Selecting the quantity of coee in the cup

The appliance is set by default to make a standard quantity of

coee.

To select the quantity of coee, press the button (g.

8) repeatedly until the message corresponding to the required

quantity of coee is displayed:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi esam04.350.S in the language / languages: English as an attachment in your email.

The manual is 5,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi esam04.350.S

DeLonghi esam04.350.S User Manual - German - 24 pages

DeLonghi esam04.350.S User Manual - Dutch - 23 pages

DeLonghi esam04.350.S Quick start guide - All languages - 7 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi esam04.350.S Manual

Product: