473850

DeLonghi esam04.350.S Manual

12
Zoom out
Zoom in
Previous page
1/21
Next page
10
11
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
and is collected in the drip tray underneath. Avoid contact with
splashes of water.
• Toturntheapplianceon,pressthe button (g. 5).
The message “Heating up Please wait” is displayed.
After heating, the message “Rinsing” is displayed, together with
a progress bar which gradually lls as preparation progresses.
As well as heating the boiler, the appliance also heats the
internal circuits by circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coee appears.
TURNING THE APPLIANCE OFF
Each time the appliance is turned o, it performs an automatic
rinse cycle which cannot be interrupted.
Important!
To avoid damaging the appliance, always press the
button to turn o.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts
(only if coee has been made).
Avoid contact with splashes of water.
To turn the appliance o, press the button (g. 5). The
appliance performs a rinse cycle then goes o.
Please note:
If the appliance is not used for an extended period, place the
main switch in the 0 position (g. 6).
Never place the main switch in the 0 position while the
appliance is on.
No rinse is performed if no drinks with coee have been made
while the machine has been on.
MENU SETTINGS
When you access the settings menu by pressing the MENU button, the
following menu items can be selected: Descale, Set language, Energy
saving, Adjust time, Auto-start, Auto-o, Set temperature, Water
hardness, Statistics, Default values.
Descaling
For instructions on descaling, see page 16.
Setting the language
To modify the language of the display, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Set language” is displayed;
3. Press the OK button;
4. Press the or button until the required language is
displayed;
5. Press the OK button to conrm;
6. Press the ESC button exit the menu.
Energy Saving
Use this function to enable or disable “Energy saving” mode.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To enable or disable the function, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Energy saving” is displayed;
3. Press the OK button. “Disable?” is displayed (or “Enable?”
if the function has already been disabled).
4. Press the OK button to disable or enable the function or
the ESC button to exit the menu.
When the function is active, if the machine is not used for
about 1 minute, “Energy saving” is displayed.
Please note!
• Toexit“Energysaving”mode,pressanybutton,thenpress
the button corresponding to the drink you want to make.
• Afewsecondsmayelapsebetween“Energysaving”mode
and delivery of the rst drink; “Preparation underway...” is
displayed.
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Adjust time” is displayed;
3. Press the OK button. The hours ash on the display;
4. Press the or button to change the hours;
5. Press the OK button to conrm. The minutes ash on the
display;
6. Press the or button to change the minutes;
7. Press the OK button to conrm;
8. Press the ESC button to exit the settings menu.
Please note!
The time is displayed when the appliance is in stand-by or
energy saving mode. If the time has not been adjusted, “0:00”
ashes on the display.
Auto-Start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must be set correctly.
To enabled Auto-on, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Auto-start” is displayed;
3. Press the OK button. “Enable?” is displayed;
4. Press the OK button. The hours ash on the display;
5. Press the or button to select the hours;
6. Press the OK button to conrm. The minutes ash on the
display;
7. Press the or button to change the minutes;
8. Press the OK button to conrm. The symbol appears
under “Auto-start” on the display.
9. Press the ESC button to exit the menu. When the appliance
is in stand-by, the symbol appears next to the clock
to indicate that auto-start has been programmed.
To disable the function:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Auto-start” is displayed;
3. Press the OK button. “Disable?” is displayed;
4. Press the OK button to conrm;
5. Press the ESC button to exit the menu. When the appliance
is in stand-by, the symbol is no longer displayed.
Auto-O (Stand-by)
The appliance is set by default to go o if not used for two
hours.
The time can be changed so that the appliance switches o
after 15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-o, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Auto-o” is displayed;
3. Press the OK button;
4. Press the or button until the required time (15 or 30
minutes, or 1, 2 or 3 hours) is displayed;
5. Press the OK button to conrm;
6. Press the ESC button exit the menu.
Auto-o is programmed.
Setting the temperature
To modify the temperature of the water used to make the
coee, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Set temperature” is
displayed;
3. Press the OK button;
4. Press the or button until the required temperature is
displayed (l = low; llll = high);
5. Press the OK button to conrm;
6. Press the ESC button exit the menu.
Setting water hardness
For instructions on setting water hardness, see page 17.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi esam04.350.S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi esam04.350.S in the language / languages: English as an attachment in your email.

The manual is 5,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi esam04.350.S

DeLonghi esam04.350.S User Manual - German - 24 pages

DeLonghi esam04.350.S User Manual - Dutch - 23 pages

DeLonghi esam04.350.S Quick start guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info