30
CHANGING THE MENU
SETTINGS
Setting the language
To modify the language on the display, proceed as
follows:
1. Press the P button to enter the settings menu.
2. Turn the selection dial until "Set Language" is
displayed;
3. Press the button to confirm (
to exit);
4. Turn the selection dial until the required lan-
guage is displayed;
5. Press the button to confirm (or the
button to cancel the operation);
6. Press the button to exit the menu.
Setting the clock
To adjust the time on the display, proceed as fol-
lows:
1. Press the P button to enter the settings menu;
2. Turn the selection dial until "Adjust Time" is
displayed;
3. Press the button. The hours flash on
the display;
4. Turn the selection dial to change the hours;
5. Press the button to confirm (or the
button to cancel the operation); the minutes
flash on the display;
6. Turn the selection dial to change the minutes;
7. Press the button to confirm (or the
button to cancel the operation);
8. Press the button to exit the menu.
Setting auto-start time
You can set the auto-start time in order to have
the appliance ready at a certain time (for example
in the morning) so you can make coffee immedia-
tely.
1. Press the P button to enter the settings menu;
2. Turn the selection dial until "Auto-Start" is dis-
played;
3. Press the button The hours flash on
the display;
4. Turn the selection dial to change the hours;
5. Press the button to confirm (or the
button to cancel the operation); the
minutes flash on the display;
6. Turn the selection dial to change the minutes;
7. Press the button to confirm (or the
button to cancel the operation);
8. Press the button to exit the menu.
After confirming the time, the red AUTO light on
the display comes on indicating that the function
is active.
To deactivate the function:
1. Press the P button to enter the settings menu.
2. Turn the selection dial until "Auto-Start" is dis-
played;
3. Press the button. The hours flash on
the display;
4. Press to deactivate the function.
NB!
To activate this function, the time
must be set.
Setting the temperature
To modify the temperature (low, medium, high) of
the water used to make the coffee, proceed as fol-
lows:
1. Press the P button to enter the menu;
2. Turn the selection dial until "Set Temperature"
is displayed;
3. Press the button to confirm ( to
exit);
4. Turn the selection dial until the required tem-
perature (high, medium, low) is displayed;
5. Press the button to confirm (or the
button to cancel the operation);
6. Press the button to exit the menu.
Setting auto-off
The appliance is set to switch automatically to
stand-by if not used for an hour. The time can be
changed so that the appliance switches off after 2
or 3 hours.
1. Press the P button to enter the settings menu.
2. Turn the selection dial until "Auto-Off" is dis-
played;
3. Press the button to confirm;
4. Turn the selection dial until the required num-
ber of hours of operation (1, 2 or 3) is displa-
yed;
5. Press the button to confirm (or the
button to cancel the operation);
6. Press the button to exit the menu.
Resetting factory default values
(reset)
This resets all menu settings and programmed
quantities back to the default values.
1. Press the P button to enter the settings menu;