687411
17
Zoom out
Zoom in
Previous page
1/27
Next page
16
2. Press and hold one of the buttons until the name of the
drink and “PROGRAM MILK” are displayed;
3. Release the button. The appliance starts delivering milk;
4. Once the required quantity of milk has been delivered into
the cup, press the button again;
5. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coee is de-
livered into the cup. The name of the drink and “PROGRAM
COFFEE” are displayed;
6. Once the required quantity of coee has been delivered
into the cup, press the button again. Coee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
Programming the quantity of coee and milk in
the cup for MILK MENU button drinks
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Press the MILK MENU button (B6);
2. Press < (B4) or > (B8) until the drink to be programmed
is displayed (MILK, FLAT WHITE, LATTE MACCHIATO or MY
MILK);
3. Press and hold the OK button (B12- g. 10) until the name
of the drink and “PROGRAM MILK” appear;
4. Release the button. The appliance starts delivering milk;
5. Once the required quantity of milk has been delivered into
the cup, press the OK button;
6. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coee is de-
livered into the cup. The name of the drink and “PROGRAM
COFFEE” are displayed;
7. Once the required quantity of coee has been delivered
into the cup, press the OK button again. Coee delivery
stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
DELIVERING HOT WATER AND STEAM
Important! Danger of burns.
Do not leave the appliance unattended while hot water or steam
is being delivered. The hot water spout (C6) becomes hot during
delivery. Hold by the handle only.
Please note!
If “Energy Saving is active, you may have to wait a few seconds
before hot water and steam are delivered.
Delivering hot water
1. Make sure the hot water spout (C6) is attached correctly;
2. Place a cup under the spout (as close as possible to avoid
splashes);
3. Press the button (B7- g. 6). “HOT WATER” is displayed,
together with a progress bar which lls gradually as prepa-
ration proceeds.
4. The machine delivers about 250 ml of hot water, then
delivery stops automatically. To interrupt delivery of hot
water manually, press the button again.
Changing the quantity of water delivered
automatically.
The machine is set by default to automatically deliver 250 ml of
hot water. To modify these quantities, proceed as follows:
1. Position a cup under the hot water spout (C6);
2. Press the (B7) button (B7) again until “HOT WATER Pro-
gram Quantity” is displayed, then release the button;
3. When the hot water in the cup reaches the required level,
press the button again.
The machine is now reprogrammed with the new quantity.
Steam delivery
1. Make sure the hot water spout (C6) is attached correctly
(g. 7);
2. Fill a container with the liquid to be heated/frothed and
immerse the cappuccino maker/hot water spout in the
liquid;
3. Press the button (B8). After a few seconds, the steam
to heat the liquid comes out of the cappuccino maker and
“STEAM” is displayed;
4. When the required temperature is obtained, interrupt
steam delivery by pressing the button again. (You
should not discharge steam for more than 3 minutes at a
time).
Important!
Always stop steam delivery before extracting the container con-
taining the liquid to avoid burns from splashes.
Tips for using steam to froth milk
When choosing the size of the container, bear in mind that
the liquid doubles or triples in volume.
For a richer denser froth, use skimmed or partially skimmed
milk at refrigerator temperature (about 5°C).
For a creamier froth, rotate the container with slow move-
ments in an upward direction.
To avoid milk with poor froth or large bubbles, always clean
the spout as described in the following section.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Eletta Cappuccino ECAM 45.766 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Eletta Cappuccino ECAM 45.766 in the language / languages: English as an attachment in your email.

The manual is 3.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Eletta Cappuccino ECAM 45.766

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - German - 27 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Dutch - 20 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - French - 21 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Polish - 22 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Spanish - 21 pages

DeLonghi Eletta Cappuccino ECAM 45.766 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info