687411
11
Zoom out
Zoom in
Previous page
1/27
Next page
10
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
professional.
Setting up the appliance
Please note!
Coee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of cof-
fee in the mill. The machine is, however, guaranteed to be
new.
You should customise water hardness as soon as possible
following the instructions in the section “Setting water
hardness” on page 20.
1. Insert the power cord (C8) connector into the socket at the
back of the appliance (A19) and connect the appliance to
the mains electricity supply (g. 1). Make sure the main
switch (A20) at the back of the appliance is pressed (g. 2).
2. Remove the water tank (A16- g. 3), open the lid (A18- g.
4), ll to the MAX line with fresh water (g. 5); replace the
lid and put the tank back in the appliance.
You must rst choose the language by moving backwards and
forwards with the < (B4) or > (B8) (g. 9) button, or waiting
until the languages scroll through on the display (B13) at inter-
vals of about 3 seconds:
3. When “English” appears, press the button (B7- g. 6)
for a few seconds until “English set” is displayed.
Follow the instructions indicated on the appliance display:
4. “INSERT WATER SPOUT”: Check that the hot water spout (C6)
is inserted on the connection nozzle (A8) and place a con-
tainer holding a minimum of 100 ml underneath (g. 7).
5. “HOT WATER Press OK” is displayed;
6. Press the button to conrm (g. 6). The appliance de-
livers water from the spout then goes o automatically.
The coee machine is now ready for normal use.
Please note!
When setting up the appliance, you need to make 4-5 cups
of coee or 4-5 cappuccinos before the appliance starts to
give satisfactory results.
When making the rst 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
To enjoy your coee even more and improve the perfor-
mance of your appliance, we recommend installing a water
softener lter (C4) as described in the section WATER SOF-
TENER FILTER” (page 21). If your model is not provided
with a lter, you can request one from De’Longhi Customer
Services.
TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch
(A20) is pressed (g. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
(A7) and is collected in the drip tray (A12) underneath. Avoid
contact with splashes of water.
To turn the appliance on, press the button (B1- g.
8). The message “Heating up, Please wait” is displayed.
When heating is complete, the message changes to “RINSING”.
As well as heating the boiler, this also heats the internal circuits
by circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coee appears.
TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts
(A7). Avoid contact with splashes of water.
To turn the appliance o, press the button (B1- g.
8).
The message Turning o Please wait” is displayed, then
the appliance performs a rinse cycle and goes o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
rst turn the appliance o by pressing the button;
release the main switch (A20) at the back of the appliance
(g. 2).
Important!
Never press the main switch while the appliance is on.
MENU SETTINGS
Rinsing
Use this function to deliver hot water from the coee spout (A7)
and from the cappuccino maker/hot water spout (C6), if insert-
ed, to clean and heat the appliance’s internal circuit.
Place a container with a minimum capacity of 100 ml under the
cappuccino maker/hot water spout (g. 7).
To enable the function, proceed as follows:
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Eletta Cappuccino ECAM 45.766 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Eletta Cappuccino ECAM 45.766 in the language / languages: English as an attachment in your email.

The manual is 3.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Eletta Cappuccino ECAM 45.766

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - German - 27 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Dutch - 20 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - French - 21 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Polish - 22 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Spanish - 21 pages

DeLonghi Eletta Cappuccino ECAM 45.766 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info