Manual DeLonghi ECAM230.13 - Magnifica S Smart (page 4 of 13) (English)

770018

Zoom out

Zoom in

1/13

• if provided, the appliance performs a rinse cycle then goes

o (stand-by).

Please note!

If you will not be using the appliance for some time, unplug

from the mains socket:

• rst turn the appliance o by pressing the button;

• press the main switch (A6) to the “0” position.

Important!

Never press the main switch while the appliance is on.

6. SETTING WATER HARDNESS

For instructions on setting water hardness, see section “18. Set-

ting water hardness”

7. AUTOOFF

The time can be changed so that the appliance switches o after

being idle for 15 or 30 minutes, or after 1, 2 or 3 hours.

To change the Auto-o setting, proceed as follows:

1. With the appliance o (standby) and the main switch (A6)

in the I position (g. 1), press and hold the /

button (B9) until the lights (B1) on the control panel come

on;

2. Select the required time interval by pressing the but-

ton (B2):

15 min

30 min

1 hour

2 hours

3 hours

3. Press the / button (B9) to conrm. The lights

go o.

The auto-o time is now programmed.

8. ENERGY SAVING

Use this function to enable or disable energy saving. When ena-

bled, this mode reduces energy consumption in compliance with

current European regulations.

1. With the appliance o (standby) and the main switch (A6)

pressed (g. 1), press and hold the button (B4) until

the light on the control panel comes on;

2. To disable the function, press the button (B2). The

light ashes;

3. To enable the function again, press the button (B2)

again: the light comes on;

4. Press the / button (B9) to conrm. The light

goes o.

The energy saving setting is now programmed.

Please note!

• When in energy saving mode, a few seconds may elapse before

the rst coee is delivered as the appliance must heat up

again.

9. SETTING THE TEMPERATURE

To change the temperature of the water used to make the cof-

fee, proceed as follows:

1. With the appliance o (standby) and the main switch (A6)

in the I position (g. 1), press and hold the button

(B2) until the lights on the control panel come on;

2. Press the button to select the required temperature:

LOW HIGH

3. Press the / button (B9) to conrm the selec-

tion. The lights go out.

10. WATER SOFTENER FILTER

Certain models are tted with a water softener lter (C4). If this

is not the case with your model, you are recommended to pur-

chase one from De’Longhi Customer Services.

To use the lter correctly, follow the instructions below.

10.1 Installing the lter

1. Turn the appliance on and wait until it is ready for use.

2. Remove the lter (C4) from the packaging. The date indica-

tor disk varies according to the lter provided (g. 8);

3. Turn the date disk to display the next 2 months of use.

Please note

The lter lasts about two months if the appliance is used nor-

mally. If the coee machine is left unused with the lter in-

stalled, it will last no longer than 3 weeks.

4. To activate the lter, run tap water through the hole in

the lter as shown in gure 9 until water comes out of the

openings at the side for more than a minute;

5. Extract the tank (A7) from the appliance and ll with

water;

6. Insert the lter in the water tank and immerse it complete-

ly for about ten seconds, sloping it and pressing it lightly to

enable the air bubbles to escape (g. 10).

7. Insert the lter in the lter housing and press as far as it

will go (g. 11);

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM230.13 - Magnifica S Smart in the language / languages: English as an attachment in your email.

The manual is 5.92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM230.13 - Magnifica S Smart

DeLonghi ECAM230.13 - Magnifica S Smart User Manual - German - 15 pages

DeLonghi ECAM230.13 - Magnifica S Smart User Manual - Dutch - 15 pages

DeLonghi ECAM230.13 - Magnifica S Smart User Manual - French - 15 pages

DeLonghi ECAM230.13 - Magnifica S Smart User Manual - Italian - 15 pages

DeLonghi ECAM230.13 - Magnifica S Smart User Manual - Spanish - 15 pages

DeLonghi ECAM230.13 - Magnifica S Smart Additional guide - All languages - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi ECAM230.13 - Magnifica S Smart Manual

Product: