Manual DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP (page 21 of 25) (English)

562578

Zoom out

Zoom in

1/25

4645

0,5 L

4. Extract the tank from the appliance and ll with water.

5. Insert the lter in the water tank and immerse it comple-

tely for about ten minutes, sloping it and pressing it lightly

to enable the air bubbles to escape (g. 46).

6. Insert the lter in the lter housing (g. 47A) and press as

far as it will go.

7. Close the tank with the lid (g. 47B), then put the tank

back in the machine.

47A 47B

When you install the lter, you must notify the appliance of its

presence.

8. Press the MENU/ESC button to enter the menu;

9. Press < or > (g. 9) until “Install lter” is displayed;

10. Press the OK button;

11. “Install?” is displayed;

12. Press the OK button to conrm the selection. “Water deli-

very Press OK “ is displayed;

13. Position a container under the hot water spout (min. capa-

city: 500 ml).

14. Press the OK button to conrm the selection. The appliance

begins hot water delivery and the message “Please wait” is

displayed.

15. After delivery, the appliance is automatically ready to make the

next drink.

The new lter is active. You can now use the appliance.

Replacing the lter

When “REPLACE FILTER” is displayed, after two months (see date

indicator) or when the appliance has not been used for 3 weeks,

you should replace the lter:

1. Extract the tank and exhausted lter;

2. Take the new lter out of its packet and proceed as illustra-

ted in points 2-3-4-5-6-7 in the previous section;

3. Position a container with a minimum capacity of 500 ml

under the hot water spout;

4. Press the MENU/ESC button to enter the menu;

5. Press < or > until “Replace lter” is displayed;

6. Press the OK button;

7. “Conrm?” is displayed;

8. Press the OK button to conrm the selection;

9. “ Water delivery Press OK” is displayed;

10. Press the OK button to conrm the selection. The appliance

begins hot water delivery and the message “Please wait” is

displayed;

11. After delivery, the appliance is automatically ready to make

the next drink.

The new lter is now active and you can use the coee machine.

Removing the lter

If you want to use the appliance without the lter, you must

remove it and notify the appliance of its removal. Proceed as

follows:

1. Extract the tank and exhausted lter;

2. Press the MENU/ESC button to enter the menu;

3. Press < or > (g. 9) until “Install lter, Enabled” is

displayed;

4. Press the OK button;

5. “Disable?” is displayed;

6. Press the OK button to conrm and the MENU/ESC button

to exit the menu.

TECHNICAL DATA

Voltage: 220-240 V~ 50/60 Hz max. 10A

Absorbed power: 1450W

Pressure: 15 bar

Max. water tank capacity: 2 l

Size LxHxD: 260 x 360 x 460 mm

Cable length: 1.75 m

Weight: 11 kg

Coee beans container capacity: 400 g

The appliance complies with the following EC

directives:

• Low Voltage Directive 2006/95/EC and subsequent amendments;

• EMC Directive 2004/108/EC and subsequent amendments;

• European Stand-by Regulation 1275/2008;

• Materials and accessories coming into contact with food conform

to EC regulation 1935/2004.

No coffee is coming out and the water is going to the drip tray and the ground beans to the bottom container Submitted on 26-8-2023 at 10:41
Reply Report abuse
Am aplecat pe o parte ma?ina de cafea pentru a goli boabele de cafea.
Acum arata mesajul Introduce?i rezervorul de za?. Submitted on 25-12-2020 at 15:29
Reply Report abuse
The milk/ steam frother seems to be blocked. When I descale machine nothing comes out of spout.
Any suggestions?
Thank you Submitted on 13-6-2020 at 17:56
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP

DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP User Manual - German - 27 pages

DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP User Manual - Dutch - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP Manual

Product: