562578

DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP Manual

20
Zoom out
Zoom in
Previous page
1/25
Next page
19
Avoid contact with splashes of water.
9. Press the OK button to conrm that you have added the
solution. The descale programme automatically performs
a series of rinses and pauses to remove limescale deposits
from inside the machine.
“Descale underway” is displayed. The descale programme
starts, and descaler comes out of the water spout.
After about 30 minutes, the message “RINSING, INSERT FILTER”
(if removed previously) is displayed, alternating with “FILL
TANK”.
10. The appliance is now ready for rinsing through with clean
water. Extract the water tank, empty, rinse under running
water, ll with clean water up to the MAX level, insert the
lter (if removed previously) and put the water tank back
in the machine. “RINSING, Press OK “ is displayed.
11. Empty the container used to collect the descaler solution
and replace it empty under the hot water spout.
12. Press the OK button to start rinsing. Hot water ows out
of the spout and the message “RINSING, Please wait” is
displayed.
13. When the water tank is completely empty, the message
“Rinsing complete, Press OK” is displayed.
14. Press the OK button.
15. “Heating up Please wait” is displayed, at the end of which
the machine will be ready for use.
SETTING THE WATER HARDNESS
The DESCALE message is displayed after a period of time establi-
shed according to the water hardness setting.
The machine is set by default for a hardness value of 4.
The machine can also be programmed according to the hardness
of the mains water in the your area so that the machine needs to
be descaled less often.
Measuring the water hardness
1. Remove the “TOTAL HARDNESS TEST” indicator paper from
its pack (attached to the English instructions).
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level.
Setting water hardness
1. Press the MENU/ESC button to enter the menu.
2. Press < or > to select “Water hardness”.
3. Press the OK button to conrm the selection.
4. Press < or > and set the hardness level as measured by the
indicator strip (see the g. in the previous paragraph).
5. Press the OK button to conrm the setting.
6. Press the MENU/ESC button to exit the menu.
The machine is now reprogrammed with the new water
hardness setting.
WATER SOFTENER FILTER
Certain models are tted with a water softener lter. If this is not
the case with your model, you are recommended to purchase
one from De’Longhi Customer Experience.
To use the lter correctly, follow the instructions below.
Installing the lter
44
1. Remove the lter from
the packaging.
2. Turn the date indicator
disk (g. 44) until the
next two months of use
are displayed.
Please note
The lter lasts about two
months if the appliance is used
normally. If the coee machine
is left unused with the lter in-
stalled, it will last a maximum of three weeks.
3. To activate the lter, run tap water through the hole in the
lter as shown in the gure until water comes out of the
openings at the side for more than a minute (g. 45).
… 20 …


Need help? Post your question in this forum.

Forumrules
1

Forum

delonghi-ecam-45.760.w---eletta-cappuccino-top

Reset search

  • No coffee is coming out and the water is going to the drip tray and the ground beans to the bottom container Submitted on 26-8-2023 at 10:41

    Reply Report abuse

  • Am aplecat pe o parte ma?ina de cafea pentru a goli boabele de cafea.
    Acum arata mesajul Introduce?i rezervorul de za?. Submitted on 25-12-2020 at 15:29

    Reply Report abuse

  • The milk/ steam frother seems to be blocked. When I descale machine nothing comes out of spout.
    Any suggestions?
    Thank you Submitted on 13-6-2020 at 17:56

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP

DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP User Manual - German - 27 pages

DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info