770037
28
Zoom out
Zoom in
Previous page
1/110
Next page
27
44 45
6. Put the upper burr back in place (g. 45);
7. Turn the selector to select the desired grinding level
(g. 13);
Make sure the burr is inserted correctly by pulling it by the han-
dle. If it is correctly inserted, it will not move.
8.4 Replacing the burrs
When the quantity of coee becomes even less, contact a cus-
tomer services centre to have the burrs replaced, then adjust
the mill again as follows entering the setting menu (“7. Menu
settings”) and selecting the rst range of the “Extra grinding
adjustment”. Then turn the ground coee quantity dial (B2) to
minimum position and set the dose like a rst use (see “The
„perfect dose““).
8.5 Cleaning the “Smart tamping station”
1. Clean the attachment area with a brush (g. 46).
2. Pull the
lever
(A20)
as far as it will go and clean the presser
cylinder with a brush
(g.47).
Then release the lever.
3. Use the tube brush (C8) to clean the coee funnel.(g. 48).
46 47 48
8.6
Cleaning Lattecrema System
A
ll components are dishwasher safe, placing them in the top
basket. If you do not have a dishwasher, wash by hand as de-
scribed in the note at the end of the section.
1. Push the release button (D3) and lift the milk container lid
(D1);
2. Remove the milk spout (D4) and milk intake tube (D7) (g.
49);
49 50
INSERT
3. Turn the froth adjustment dial (D5) counter-clockwise to
the “Insert position (g. 50) and pull;
4. Make sure there are no milk residues on the hollow and
groove under the dial
(g. 51)
:
if necessary,
scrape the
groove with a toothpick;
51 52
5. Rinse inside the froth adjustment dial seat with running
water (g. 52);
6. Check that the intake tube and spout are not clogged with
milk residues;
7. Reassemble all the lid components;
8. Carefully wash and rinse the milk container (D8) ;
9. Attach the lid back on the milk container.
Please note: washing by hand
Washing the lid in a dishwasher guarantees the perfect hygiene
of all the components. When washing by hand, wash all compo-
nents of the milk container lid thoroughly with hot water and
immerse them in a basin of hot water for 30 minutes before pro-
ceeding as described in point 4.
9.
WATER HARDNESS
The
descale light (B8) comes on after a period of time es-
tablished according to water hardness. The machine can also
be programmed according to the actual hardness of the water
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi EC9665 La Specialista Maestro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi EC9665 La Specialista Maestro in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 40.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info