821516
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
WATER CIRCUIT EMPTY
PRESS OK TO START
The water circuit is empty Press the selector corresponding to "OK" to
deliver water from the spout (D6) until it ows
out normally.
If the problem persists, make sure the water
tank (A17) is fully inserted.
A new water softener lter has been inserted
(D4)
Make sure the instructions for inserting the
new lter have been followed correctly (sec-
tion "15. Water softener lter"). If the problem
persists, remove the lter (see section 15.3
Removing the lter).
PRESS OK TO CLEAN OR TURN
DIAL
The milk carafe has been inserted with the froth
adjustment dial (E1) in the CLEAN position.
To proceed with the CLEAN function, press
the selector corresponding to
"OK", or turn
the froth adjustment dial to one of the milk
positions.
DESCALING INTERRUPTED
PRESS NEXT TO CONTINUE
Descaling has been interrupted or has not been
completed correctly.
Press NEXT to resume the descaling proce-
dure. For more information, see section "13.
Descaling".
TURN MILK FROTH
ADJUSTMENT DIAL TO CLEAN
POSITION
Milk has been delivered recently and the tubes
inside the milk carafe (E) must be cleaned.
Turn the froth adjustment dial (E1) to CLEAN
(g. 18).
TURN FROTH ADJUSTMENT
DIAL
A recipe with milk was requested Turn the dial to the required froth position.
SELECT A MILDER TASTE
OR REDUCE COFFEE
QUANTITY
Too much coee has been used. Select a milder taste by pressing the "INTEN-
SITY" button (C5) or reduce the quantity of
ground coee (maximum 1 measure).
DESCALING NEEDED
PRESS OK TO START
~30MIN
Indicates that the machine needs descaling. Press the selector corresponding to "OK" to
start descaling or "ESC" to descale later. The
descaling procedure described in section "13.
Descaling" needs to be performed.
REPLACE WATER FILTER
PRESS OK TO START
The water softener lter (D4) is exhausted. Press the selector corresponding to "OK" to re-
place or remove the lter, or "ESC" to carry out
the procedure later. Follow the instructions in
section "15. Water softener lter".
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Dinamica Plus - ECAM380.95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica Plus - ECAM380.95 in the language / languages: English as an attachment in your email.

The manual is 10.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica Plus - ECAM380.95

DeLonghi Dinamica Plus - ECAM380.95 User Manual - German - 32 pages

DeLonghi Dinamica Plus - ECAM380.95 User Manual - Dutch - 124 pages

DeLonghi Dinamica Plus - ECAM380.95 User Manual - French, Italian - 52 pages

DeLonghi Dinamica Plus - ECAM380.95 User Manual - Portuguese, Spanish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info