687415

DeLonghi Dinamica ECAM 350.35 Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
12
3. Press OK (B3) to conrm and select the required item with
the selection arrows. Then follow the instructions for each
setting.
• Set temperature:
To modify the temperature of the water used to make the coee,
proceed as follows:
4. Press OK (B3). The current value appears on the display
(B1) and the "New" value ashes;
5. Select the new value you want to set using the selection
arrows (B2 or B4);
6. When the required value (low, medium, high, maximum)
has been selected, press OK.
The display goes back to the previous screen.
• Water hardness:
For instructions on identifying and setting water hardness, see
section “15. Setting water hardness”.
• Auto-o (standby):
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours
4. Press OK. The current value appears on the display (B1) and
the "New" value ashes;
5. Select the new value you want to set using the selection
arrows (B2 or B4);
6. When the required time has been selected, press OK.
The display goes back to the previous screen.
• Energy saving:
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
4. Press OK. The current state ("Enabled" or "Disabled") and
the operation to be performed ("Disable?" or "Enable?") is
displayed. Press OK to conrm;
5. Press OK to disable or enable the function.
The display goes back to the previous screen.
Please note!
• when the function is enabled, the "ECO" symbol appears
on the display.
• When in energy saving mode, a few seconds elapse before
the rst coee, cappuccino or milk-based coee is deliv-
ered as the appliance must heat up again.
• Beep:
Use this function to enable or disable the beep. Proceed as
follows:
4. Press OK. The current state ("Enabled" or "Disabled") and
the operation to be performed ("Disable?" or "Enable?") is
displayed. Press OK to conrm;
5. Press OK to disable or enable the function.
The display goes back to the previous screen.
• Default beverages:
Use this function to reset the default values for all the beverag-
es, or the individual beverages programmed previously. Select
the beverage, then proceed as follows:
4. Select "All" to reset the aroma and quantity settings to the
default values, or select the required beverage, then press
OK;
5. "Reset?": to reset the default values, press OK.
6. "Reset complete": the appliance conrms the reset and
goes back to the previous screen.
To reset another beverage, repeat from point 4 or to exit, press
/ESC (B5).
• Default values:
Use this function to reset all the appliance and beverage set-
tings (apart from the language which remains as selected the
rst time the appliance was used). Select the item, then proceed
as follows:
4. "Reset?"; press OK;
5. "Reset complete": the appliance conrms the reset and
goes back to the previous screen.
To exit, press /ESC (B5).
8.7 Statistics
This displays statistics relating to the machine. To display the
statistics, proceed as follows:
1. Press (B5) to enter the "Settings" menu;
2. Press the selection arrows (B2 and B4) until "Statistics" is
displayed between the two dotted lines;
3. Press OK (B3): statistics on the appliance are displayed, use
the selection arrows to scroll through the items;
4. Then press /ESC (B5) to exit.
To go back to the main screen, press /ESC.
9. MAKING COFFEE
9.1 Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by calibrating
the coee grinding using the adjustment dial (A5) (g. 6).
Please note:
The grinding adjustment dial must only be turned when the
coee mill is in operation.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Dinamica ECAM 350.35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica ECAM 350.35 in the language / languages: English as an attachment in your email.

The manual is 7,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica ECAM 350.35

DeLonghi Dinamica ECAM 350.35 User Manual - German - 22 pages

DeLonghi Dinamica ECAM 350.35 User Manual - Dutch - 19 pages

DeLonghi Dinamica ECAM 350.35 User Manual - French - 19 pages

DeLonghi Dinamica ECAM 350.35 User Manual - Italian - 25 pages

DeLonghi Dinamica ECAM 350.35 User Manual - Spanish - 18 pages

DeLonghi Dinamica ECAM 350.35 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info