687415
12
Zoom out
Zoom in
Previous page
1/24
Next page
11
- Energy saving,
- Beep,
- Default beverages,
- Default values;
Statistics.
8.1 Rinsing
Use this function to deliver hot water from the coee spouts
(A19) to clean and heat the appliance’s internal circuit.
Place a container with a minimum capacity of 100ml under the
coee spouts.
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
To perform a rinse, proceed as follows:
1. Press (B5) to enter the "Settings" menu;
2. Press OK B3 to conrm "Rinsing";
3. After a few seconds, hot water is delivered from the coee
spouts to clean and heat the appliances internal circuit. A
progress bar is displayed and lls gradually as preparation
proceeds;
4. To interrupt, press the arrow corresponding to "STOP" (B4).
Please note!
If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
After cleaning, it is normal for the coee grounds container
(A11) to contain water.
8.2 Language
To modify the language of the display (B1), proceed as follows:
1. Press (B5) to enter the "Settings" menu;
2. Press the selection arrows (B2 and B4) until "Language" is
displayed between the two dotted lines;
3. Press OK (B3). The available languages are displayed;
4. Press the selection arrows until the required language is
displayed between the two dotted lines;
5. Press OK to conrm;
6. The appliance goes back to the "Settings" menu;
7. Press /ESC to exit the menu.
8.3 Maintenance
Here you can nd all the maintenance operations required by
the appliance over time:
Descale: For instructions on descaling, see section “14.
Descaling”.
Install lter: For instructions on how to install the lter
(C4), see section “16.1 Installing the lter”.
To select the operation you require, proceed as follows:
1. Press (B5) to enter the "Settings" menu;
2. Press the selection arrows (B2 and B4) until "Maintenance"
is displayed between the two dotted lines;
3. Press OK B3 to conrm;
4. Press the selection arrows to display the operation to be
performed;
5. Press OK to conrm and perform the operations as de-
scribed in the corresponding sections.
8.4 Program beverages
The appliance is set by default to automatically deliver stand-
ard quantities. To change these quantities and customise the
directly selected beverages and (B12), proceed as
follows:
1. Press (B5) to enter the "Settings" menu;
2. Press the selection arrows (B2 and B4) until "Prg. beverag-
es" is displayed between the two dotted lines;
3. Press OK (B3) to conrm: the appliance lists the beverages
you can customise;
4. Press the selection arrows until the beverage you want to
customise is displayed, then press OK to conrm;
5. Beverages with coee: "Program aroma" appears on
the display: press the selection arrows (B2 and B4) or
(B7) until the required aroma is selected (see section “9.4
Temporarily varying the coee aroma”), then press OK.
"Program coee" appears on the display together with a
bar which gradually lls as delivery progresses. When the
required quantity is reached, press OK;
Hot water: press OK. Delivery begins: press OK when the
required quantity is reached.
6. "Save parameters?": to save the settings, press OK (other-
wise press /ESC - B2 or B5).
7. "Parameters saved" (or "Parameters not saved"). The ap-
pliance is ready for use again.
8.5 Program My beverages
Follow the procedures described in the previous section “8.4 Pro-
gram beverages”to customise the beverages in the "
" (B13) or proceed with direct programming, as described in
section “11. Programming and selecting”.
8.6 General
Here you can nd the settings to customise the basic functions
of the appliance:
1. Press (B5) to enter the "Settings" menu;
2. Press the selection arrows (B2 and B4) until "General" is
displayed between the two dotted lines;
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Dinamica ECAM 350.35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica ECAM 350.35 in the language / languages: English as an attachment in your email.

The manual is 7,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica ECAM 350.35

DeLonghi Dinamica ECAM 350.35 User Manual - German - 22 pages

DeLonghi Dinamica ECAM 350.35 User Manual - Dutch - 19 pages

DeLonghi Dinamica ECAM 350.35 User Manual - French - 19 pages

DeLonghi Dinamica ECAM 350.35 User Manual - Italian - 25 pages

DeLonghi Dinamica ECAM 350.35 User Manual - Spanish - 18 pages

DeLonghi Dinamica ECAM 350.35 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info