681826
61
Zoom out
Zoom in
Previous page
1/69
Next page
Almost all system boards use a coincell battery that helps retain BIOS settings, including the password. To reset the password, remove the
coincell battery, wait for 15 to 30 seconds and replace the coincell battery.
NOTE: For more information on the location of the coincell battery and instruction on removing and replacing it, see the Service
Manual at www.dell.com/support.
Use systemboard jumper
NOTE: System-board jumper is available only on desktop computers.
Almost all system boards on desktop computers contain a jumper to clear CMOS settings along with the BIOS password. The location of
this jumper varies depending upon the system board. Look for the jumpers near the CMOS battery, usually labeled as CLR, CLEAR, CLEAR
CMOS, and so on.
For procedure on clearing passwords and clearing CMOS settings, see your computer Service Manual at www.dell.com/support.
Changing the boot sequence
You may need to change the boot sequence to boot from a device other than your default device, for example when reinstalling the
operating system or, using a recovery disc or USB drive.
You can select the boot order using the Boot Menu or the BIOS setup program.
Using boot menu
Use the Boot Menu to change the boot sequence of your computer for the current boot.
NOTE
: Your computer boots from the selected device only for the current boot and returns to the default device next time you
reboot your computer.
To select a boot device using the Boot Menu:
1 Turn on or restart your computer.
2 Press F12 at the Dell logo to access the boot menu.
NOTE
: If you wait too long and the operating system logo appears, continue to wait until you see the Windows desktop,
then restart your computer and try again.
3 Use the up-arrow or downarrow keys to select the device you want to boot from and press Enter.
Using BIOS setup program
Use BIOS setup program to select the order of devices your computer uses to boot every time.
To change the boot sequence using BIOS setup program:
1 Enter BIOS setup program.
2 Select the Boot tab.
3 Select the check boxes to enable or disable the devices to be used for booting.
4 Move the devices up or down to change the boot sequence.
NOTE
: The rst device in the list is the default boot device.
BIOS 61
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dell XPS 15 9570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dell XPS 15 9570 in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dell XPS 15 9570

Dell XPS 15 9570 Installation Guide - English - 19 pages

Dell XPS 15 9570 Installation Guide - German - 19 pages

Dell XPS 15 9570 User Manual - German - 73 pages

Dell XPS 15 9570 User Manual - Dutch - 73 pages

Dell XPS 15 9570 Installation Guide - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info