681826
59
Zoom out
Zoom in
Previous page
1/69
Next page
Invoking ePSA
To invoke ePSA:
1 Restart the computer.
2 Press F12 at the Dell logo to access the BIOS setup program.
NOTE: f you wait too long and the operating system logo appears, continue to wait until you see the Windows desktop,
then restart your computer and try again
3 Select Diagnostics and press Enter.
4 Follow the instructions on the screen to complete the test and note any error messages that appear.
If a component fails the test, the test stops, the computer beeps, and an error code is displayed. Note the error code(s) and search for
solutions at www.dell.com/support or Contact Dell.
Follow the instructions on the screen to continue to the next test, retest the component that failed, or stop the test and restart the
computer.
If the PSA completes successfully, the following message appears on your screen: No problems have been found with this system so far.
Do you want to run the remaining memory tests? This will take about 30 minutes or more. Do you want to continue?
(Recommended).
Press <y> to continue if you are experiencing memory issue, otherwise press <n> to nish the test.
If the ePSA completes with errors, the following message appears on your screen: Testing completed. One or more errors were detected.
The Event Log tab in the Status window displays the errors that occurred during the ePSA tests.
Beep codes
Your computer may emit a series of beeps during start-up if there are errors or problems. This series of beeps, called a beep code, identies
a problem. If this occurs, note the beep code and contact Dell for assistance.
NOTE
: Some of the beep codes mentioned in the table below may not apply to your computer.
Table 13. Beep codes and possible problems
Beep codes Possible problems
One Possible system board failure—BIOS ROM checksum failure.
Two No RAM detected
NOTE: If you installed or replaced the memory module, ensure that the memory module is
seated properly.
Three Possible system board failure—Chipset error
Four RAM read/write failure
Five Realtime Clock failure
Six Video card or video controller failure
Seven Processor failure
NOTE: This beep code is supported for computers with Intel processor only.
Eight Display failure
Troubleshooting 59
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dell XPS 15 9570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dell XPS 15 9570 in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dell XPS 15 9570

Dell XPS 15 9570 Installation Guide - English - 19 pages

Dell XPS 15 9570 Installation Guide - German - 19 pages

Dell XPS 15 9570 User Manual - German - 73 pages

Dell XPS 15 9570 User Manual - Dutch - 73 pages

Dell XPS 15 9570 Installation Guide - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info