348
13
Zoom out
Zoom in
Previous page
1/20
Next page
13
Coding of new Remote Control Units Further information, see technical manual.
A Press button B to switch the alarm and the Immobilizer (if present) OFF. The
emergency deactivation can also be used.
B Switch the ignition ON and OFF 5 times. The LED flashes rapidly.
C When you switch the ignition ON again, the LED should flash. Allow the LED
to flash as many times as the first number of your PIN code and then switch
the ignition OFF again (the LED stops flashing).
D Switch the ignition ON again and repeat the procedure until all digits of the
PIN code have been entered.
E The LED flashes rapidly. If you make a mistake, start again at «C» with the
first digit of the PIN code.
F Switch the ignition ON again and press buttons A and B of the Remote Control
Unit being programmed simultaneously (one Remote Control Unit at a time).
Press both buttons until you receive the sound and light confirmation.
G Switch the ignition OFF once all Remote Control Units have been coded.
Important: Coding the keys deletes the old codes, A maximum of 4 Remote Control Units can be
coded.
Connection of Central Locking Further information, see technical manual.
P-1 Multiplug, Central Locking
Plug for connection of the Central Locking, cf. diagram, page 14
The plug for the Central Locking P-1 must be configured (assigned) for the relevant car. If the function
of the Central Locking is unclear, the original circuit diagrams for the car must be consulted. Always
check with a voltmeter/multimeter before making any connections. The leads in the P-1 plug which are
not used must be disconnected or insulated.
Important: Each relay in the Central Unit can be loaded with a maximum of 15 amps. The
Central Unit can become damaged if correctly wired or overloaded. Output P-1.1 is fused by an
automatic circuit breaker.
P-1
Plug Function Colour
P1.1
Battery + Red/white
P1.2
Lock NC White/orange
P1.3
Ground Black/white
P1.4
Unlock COM Yellow
P1.5
Lock COM White/blue
P1.6
Lock NO White/brown
P1.7
Unlock NO Green
P1.8
Unlock NC Lilac
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Defa 800 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Defa 800 series in the language / languages: Dutch as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info