348
18
Zoom out
Zoom in
Previous page
1/20
Next page
18
Function 7: Time for Central Locking
Press button B to indicate the current Central locking pulse factor.
1 flash = 1 second pulse
2 flashes = 4 seconds pulse
3 flashes = 0.5 seconds pulse
Press button B again to select the next pulse length, hold button B to select the preceding factor. The
number of confirmation signals indicates the selected pulse factor programmed.
Function 8: Security functions of Central locking
Press button B to indicate the current setting. When this function is selected, it prohibits activation of
the alarm until you have exited the vehicle. This function is intended for vehicles with a locking system
for the Central Locking.
1 flash = Security function not selected (Standard)
2 flashes = Security function selected
Press button B again to select the next function. The number of confirmation signals indicates the
current status.
Function 9: Start lock/Immobilizer
Press button B to indicate the current setting.
Starter kill: The lock function is switched on at the same time as the alarm is armed and is deactivates
as soon as the alarm is switched off again.
Immobilizer: This locking function is activated automatically 30 seconds after the ignition is switched
off and a door is opened. The Immobilizer is deactivated when you switch off the alarm. If you do not
start the car within 30 seconds after opening the doors, the Immobilizer is activated again.
1 flash = Immobilizer is selected (standard on 823)
2 flashes = Starter kill is selected (standard on 821)
Press button B again to select the Immobilizer, hold button B to select the start lock. The number of
confirmation signals indicates the current status.
Function 10: Convenience closing
Switching on the alarm can simultaneously lock the doors and close the sliding roof.
Press button B to indicate the current setting.
1 flash = Function is not selected (standard)
2 flashes = Convenience closing via the original system
3 flashes = Convenience closing via DEFA Power Module, closes only electric window winders
Press button B again to select the next convenience closing mode or hold button B to select the
preceding one. The number of confirmation signals indicates which convenience closing mode is
selected.
Application of function: Hold button A until all elements are closed.
Function 11: Panic function
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Defa 800 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Defa 800 series in the language / languages: Dutch as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info