724608
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
AFTER SALES SUPPORT:
AUS
MODEL: PRG500J PRODUCT CODE: 10562 09/2019
info.aldi@positecgroup.com
1300 889 028
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the baery pack from the power
tool before making any adjustments, changing accessories, or storing power tools. Such
prevenve safety measures reduce the risk of starng the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instrucons to operate the power tool. Power tools are dangerous
in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condion that may aect the power tool’s operaon. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
f) Keep cung tools sharp and clean. Properly maintained cung tools with sharp cung
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instrucons,
taking into account the working condions and the work to be performed. Use of the
power tool for operaons dierent from those intended could result in a hazardous situaon.
5) Service
a) Have your power tool serviced by a qualied repair person using only idencal replacement
parts. This will ensure that the safety of the power tool is maintained.
Addional safety instrucons for your spray gun
1. Beware of high pressure at the nozzle and toxic sprays, it can cause severe skin damage.
Never allow any part of the body to come in contact with the spray.
2. It is recommended that the tool always be used via a residual current device with a rated
residual current of 30mA or less.
3. Do not use guns for spraying ammable materials.
4. Do not clean guns with ammable solvents.
5. WARNING! Be aware of any hazard presented by the material being sprayed
and consult the markings on the container or the informaon supplied by the
manufacturer of the material to be sprayed.
6. Do not spray any material where the hazard is not known.
7. Use appropriate personal protecve equipment, such as dust mask, protecve clothing.
8. Do not clean guns with ammable solvents.
6. IMPORTANT INFORMATION PRODUCT CARE
Care MUST be taken to ensure both the safety and life of the product is maintained. Ensure you
have read all of the safety notes in the previous pages before using the 500W Paint Sprayer+
Spray Shelter in Carry Bag.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Deco PRG500J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Deco PRG500J in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info