724608
18
Zoom out
Zoom in
Previous page
1/20
Next page
18
AFTER SALES SUPPORT:
AUS
MODEL: PRG500J PRODUCT CODE: 10562 09/2019
info.aldi@positecgroup.com
1300 889 028
13. FAQ/TROUBLESHOOTING
Symptom Possible Cause Remedy
No spray
Nozzle clogged Clean the nozzle
Sucon pipe clogged Clean the sucon pipe
Flow rate set too low
Turn the adjusng knob clockwise (+)
to increase the ow rate
Sucon pipe loosened Tighten the sucon pipe
Paint container not
ghtened
Tighten the paint container
Paint is too thick
Check the viscosity of the paint and
dilute.
Paint dripping from
nozzle
Nozzle loosened Tighten the nozzle
Worn nozzle Replace the nozzle
Paint accumulated on air
cap or nozzle
Clean the air cap or nozzle with
solvents or water.
Spraying too thick
Paint is too thick
Check the viscosity of the paint and
dilute.
Flow rate set too high
Turn the adjusng knob an-clockwise
(-) to decrease the ow rate
Low pressure in the paint
container
Re-ghten the paint container
Irregular spraying
Not enough paint in the
paint container
Add enough paint
Dirty lter Clean the lter or replace it.
Liquid dripping while
spraying
Flow rate set too high
Turn the adjusng knob an-clockwise
(-) to decrease the ow rate
For further inquiries or issues associated with your sprayer, call our Customer Service on
1300 889 028 or email us at info.aldi@positecgroup.com
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Deco PRG500J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Deco PRG500J in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info