608088
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
06/02/12 - 300024525-001-B UNO/2 200, 300, 400, 500 - UNO/1 200, 300, 400, 500
5.3 Adjustment keys
The regulator is controlled by the 3 keys only located below the
display.
The right-hand key (1) takes you to the next menu or increases the
adjustment values.
The left-hand key (2) does the opposite.
The adjustment parameters are displayed after the measured values.
To access these parameters, press and hold the right-hand key for 2
sec. from parameter TC. When the display shows an adjustment
parameter, the word SET appears. To set the value displayed, press
the middle button 3.
1. Select the required parameter using keys 1 and 2.
2. Press the 3 key: The word SET flashes.
3. Adjust the value using keys 1 and 2.
4. Press the 3 key: The set value is stored. The word SET stops
flashing.
5.4 LED message code
Continuously green
PUMPE relay is closed.
Regulation operating normally (System Operating). Solar system
Operating. The temperature of the hot water tank (parameter TS)
increases.
Continuously red
PUMPE relay is open.
The installation is stopped. The solar collectors are not hot enough
(parameter TC) to enable operation.
Flashing green/red
- Initialisation phase
- Sensor fault.
See chapter Sensor fault.
- The installation is in manual mode.
Set the regulator to automatic mode.
- Maximum tank temperature exceeded.
The hot water tank has reached the set temperature and the
installation is in overheating safety mode or in cooling mode.
- Maximum temperature of the solar collectors exceeded.
The installation is in safety mode. It remains in this mode until the
temperature of the solar collectors has fallen back below the
maximum temperature.
1
3
2
DiemasolA_0004
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich INISOL - UNO-2 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich INISOL - UNO-2 400 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of De Dietrich INISOL - UNO-2 400

De Dietrich INISOL - UNO-2 400 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info