609083
68
Zoom out
Zoom in
Previous page
1/84
Next page
68
GT 530A DDR_G30A/AE _IO_V4.0 09/2013
Connections
Filling the system
Filling shall be performed with a low ow rate from a
low point in the boiler room in order to ensure that all
the air in the boiler is bled from the high point of the
system. All the pumps must be stopped before lling
(included shunt pump(s)).
i
Refer to the water quality Manual
CAUTION
Instructions for starting up the boiler for the rst
time after the system is fully or partly drained:
If all the air is not bled naturally to an expansion
vessel which opens out onto the air, the system
must include manual bleeder valves, in addition to
automatic bleeder valves with the capability to bleed
the system by themselves when it is operating, the
manual bleeder valves are used to bleed all the high
points of the system and to make sure that the lled
system is free of air before the burner is turned on.
CAUTION
Do not add cold water suddenly into the boiler when
it ishot.
Sludge removal
A tapped Ø 2” hole with a plug has been provided on
the bottom of the front of the boiler. Fit a 1/4 turn
valve (not supplied) on the opening to remove the
sludge.
Sludge removal leads to the draining of large quantities
of water, so remember to rell the system after the
operation.
i
Never replace a boiler in an existing system
without carefully rinsing the system rst.
Install a sludge decanting pot on the return
pipe, very close to the boiler.
1
2” tapped sludge removal hole
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich GT 530A Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich GT 530A Series in the language / languages: English as an attachment in your email.

The manual is 13,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info